Shark Navigator NV351 Owner's Manual
Hide thumbs
Also See for Navigator NV351:
- User manual ,
- Owner's manual (52 pages) ,
- Owner's manual (10 pages)
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Shark Navigator NV351
Summary of Contents for Shark Navigator NV351
- Page 1 WWW.SHARKCLEAN.COM NV351 NV351WM1 NV352 NV353 OWNER’S GUIDE...
-
Page 2: Important Safety Instructions
DO NOT force into outlet or try to modify to fit. 24. Turn off all controls before plugging in or 20. DO NOT place vacuum cleaner 11. Only use Shark® branded filters unplugging the vacuum. on unstable surfaces such as chairs or tables. -
Page 3: Getting Started
Getting Started Contents Thank you for Getting Started Mode 1: Upright Vac purchasing the Shark Mode 2: Detachable Canister Navigator ® Above-Floor Cleaning Lift-Away ® With Floor Nozzle Storing Maintenance Emptying the Dust Cup Cleaning the Pre-Motor Filters Fig. 1 Fig. - Page 4 Mode 1: Upright Vac Your new Shark Navigator Lift-Away vacuum cleaner can easily be configured into different cleaning modes to ® ® meet all your cleaning needs: upright vacuum and detachable canister - both with constant suction power. Upper Cord...
-
Page 5: Dust Cup
Mode 2: Detachable Canister Cord Suction Hook Release Collar You can carry your vacuum Release suction for cleaner in both modes by the easier push & pull carry handle located on top of the on thick carpets dust cup. and area rugs. Fig. -
Page 6: With Floor Nozzle
Above-Floor Cleaning With Floor Nozzle Storing Maintenance To reduce the risk of electric shock, unplug the unit before performing any cleaning, maintenance, or troubleshooting checks. Reassemble all parts securely before operating vacuum. DO NOT operate the vacuum without the pre-motor filters and dust cup in place. - Page 7 Maintenance - cont’d COMPONENT MAINTENANCE SCHEDULE Dust Cup Empty each time you vacuum. Rotating Pre-Motor Foam Filter Rinse and air dry every 3 months under normal use. Brush Pre-Motor Felt Filter Rinse and air dry every 3 months under normal use. Fig.
-
Page 8: Ordering Parts
Ordering Parts Maintenance - cont’d Make sure you are working in a well lit area and use a flashlight to help search for blockages. Fig. 28 Fig. 29 Fig. 30 CHECKING FOR BLOCKAGES Hose and Connections to Vacuum Blockages may cause your vacuum to overheat and shut down. •... -
Page 9: Troubleshooting Guide
Product Registration Note: If vacuum still does not start, contact Customer Service at: 1-800-798-7398. Please visit www.registeryourshark.com or call 1-800-798-7398 to register your new Shark ® product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address. - Page 10 Notes Notes 1-800-798-7398 sharkclean.com...
- Page 11 Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice. Shark, Shark Navigator and Lift-Away are registered trademarks of SharkNinja Operating LLC. For SharkNinja U.S. Patent information visit sharkninja.com/USPatents ©...
Need help?
Do you have a question about the Navigator NV351 and is the answer not in the manual?
Questions and answers
My carpet stopped working. I cleaned the brush rollers but still will not spin.
The brush roller on your Shark Navigator NV351 vacuum may not be spinning due to the following reasons:
1. Selector Switch Setting: Ensure the selector switch is set to "Setting II (Brushroll On)." If it is not, the brush roller will not spin.
2. Vacuum Overheating: If the vacuum has overheated, the motor protective thermostat may have automatically turned off the suction and brush roller. Allow the vacuum to cool down before trying again.
3. Improper Handle Position: Step lightly on the floor nozzle and tilt the handle back to engage the brush roller.
If these steps do not resolve the issue, refer to the troubleshooting guide or contact Shark customer service.
This answer is automatically generated