Table of Contents
Advertisement
MAINTENANCE
To keep your vacuum's
suction power optimal, follow
these instructions. Make
sure unit is off and cord is
unplugged.
WARNING: To reduce
the risk of shock and
unintended operation,
turn off power and
unplug unit before
servicing�
Hand wash filters
only with water to
prevent damage from
cleaning chemicals�
Allow ALL filters to
air-dry completely
before replacing
them in the vacuum
to prevent liquid from
being drawn into
electric parts�
IMPORTANT: DO NOT
use soap when cleaning
the filters.
EMPTYING THE DUST CUP
1
Pull up on dust cup
RECOMMENDED
release latch and lift
FILTER CLEANING
dust cup off pod.
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XFF755
Clean every 3 months.
Post-Motor Filter
(HEPA)
XHF650
Clean once a year.
21
1-800-798-7398
STEP 1
STEP 2
2 Hold dust cup over a
trash bin and press the
empty-release latch on the
bottom.
STEP 3
CLEANING THE FILTERS
1
Pre-Motor
3 Press release latch on top
(foam and felt):
of the dust cup to access
With the dust cup
dust screen and remove
removed, take out and
built-up debris as required.
rinse the foam and felt
filters with water. Tap
loose dirt off filters
between washes
as needed.
FOAM FILTER
FILTER FRAME
FELT FILTER
HEPA
2
Post-Motor (HEPA):
To access the HEPA filter,
reach under the grill and
pull the Filter Access
latch to remove the grill.
Remove and rinse the
HEPA filter.
22
s h a r kc l e a n . c o m
Advertisement
Table of Contents
