Power Cord - Shark Navigator Swivel Pro Complete NV150 Series Owner's Manual

2
(Click)
1
(Click)
1. Insert Wand into Pod.
2. Insert Handle into wand.
3. Attach Hose to back of vacuum pod.
4. Attach hose to Hose Clip on wand.
5. Insert C-Shaped Clip onto base of vacuum pod and remove tape.
6. Store Accessories on Tool Storage Posts.
For proper operation, ensure all parts are firmly clicked into place.
s h a r kc l e a n . c o m
ASSEMBLY
(Click)
4
(Click)
3
(Click)
5
UPPER CORD HOOK
For cord access, rotate upper hook down
and remove cord.
ASSEMBLY
Upper Cord Hook
6
Tool Storage Posts
Lower Cord Hook

POWER CORD

CORD HOLDER
Use cord holder on the side of wand to hold
cord in place while vacuuming.
s h a r kc l e a n . c o m