Notes
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to
record from the source.
• Only analog input signals are output from the
analog output jack (for recording).
• HDMI sound cannot be recorded.
• While only composite video signals are being
recorded, the auto standby function of the receiver
may start up and interrupt the recording. In this
case, set "Auto Standby" to "OFF" (page 121).
Tuner Operations
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation, be
sure you have connected the FM and AM
antennas (aerials) to the receiver (page 35).
Tip
The tuning scale for direct tuning is shown below.
Area
USA
Europe
* The AM tuning scale can be changed (page 63).
SHIFT
FM
AM
100 kHz
10 kHz*
50 kHz
9 kHz
Numeric
buttons
GUI MODE
V/v/b,
TOOLS/
OPTIONS
MENU
GB
61