Sony STR-DN2010 Manual de instrucciones Operating Instructions Manual page 29

To connect a Blu-ray Disc player
Video signals
or
A
A Component video cord (not supplied)
B Video cord (not supplied)
C Audio cord (not supplied)
D Optical digital cord (not supplied)
E Coaxial digital cord (not supplied)
Notes
• The initial setting of the COMPONENT VIDEO
IN 1 jacks are Blu-ray Disc player. If you want to
connect your Blu-ray Disc player to the
COMPONENT VIDEO IN 2 or IN 3 jacks, set
"Input Assign" in the Input Option menu
(page 104).
• To input multi channel digital audio from the
Blu-ray Disc player, set the digital audio output
setting on the Blu-ray Disc player. Refer to the
operating instructions supplied with the Blu-ray
Disc player.
Blu-ray Disc player
Audio signals
or
B C
or
*
D E
Recommended connection
Alternative connection
* When you connect a component equipped with an
COAXIAL jack, set "Input Assign" in the Input
Option menu (page 104).
continued
GB
29