Sony STR-DN2010 Manual de instrucciones Operating Instructions Manual page 10

Indicators on the display
1 2
PL ll
LH SW RH
LF E
L R
C
SL S SR
SB L SB SB R
qj qh
Indicator and explanation
A
SW
Lights up when the audio signal is output from
the SUBWOOFER jack.
B Dolby Pro Logic indicators
Lights up one of the respective indicators when
the receiver performs Dolby Pro Logic
processing. This matrix surround decoding
technology can enhance input signals.
PL
PL II
PL IIx
PL IIz
Note
These indicators may not light up depending on
the speaker pattern setting.
C Input indicators
Light up to indicate the current input.
ANALOG
Lights up when
– no digital signal is being input.
– INPUT MODE is set to "ANALOG".
– the "A. DIRECT" is being selected.
HDMI
The receiver recognizes a component connected
via an HDMI IN jack.
COAX
Lights up when digital signal is input through the
COAXIAL jack (page 103).
OPT
Lights up when digital signal is input through the
OPTICAL jack (page 103).
ARC
Lights up when TV input is selected and the
Audio Return Channel (ARC) signals are
detected.
GB
10
3
x z
ANALOG HDMI COAX OPT
EQ RDS
D.RANGE SIRIUS ST
qg qf
Dolby Pro Logic
Dolby Pro Logic II
Dolby Pro Logic IIx
Dolby Pro Logic IIz
4
D + EX TrueHD NEO 6
ARC
CAT MEM DTS – HD MSTR HI RES LBR
DTS –ES 96 24 LPCM SLEEP BI –AMP
qd qs
Indicator and explanation
D Dolby Digital Surround indicators
Lights up one of the respective indicators when
the receiver is decoding the corresponding
Dolby Digital format signals.
D
D EX
D+
TrueHD
Note
When playing a Dolby Digital format disc, be
sure that you have made digital connections and
that INPUT MODE is not set to "ANALOG"
(page 103).
E NEO:6
Lights up when DTS Neo:6 Cinema/Music
decoder is activated (page 74).
F DTS-HD indicators
Lights up one of the respective indicators when
the receiver is decoding the corresponding
DTS-HD format signals.
DTS-HD MSTR
DTS-HD HI RES
DTS-HD LBR
G S-AIR
Lights up when the S-AIR transmitter (not
supplied) is inserted.
H SP A/SP B/SP A B
Lights up according to the front speaker system
used (page 42).
However, these indicators do not light up if the
speaker output is turned off or if headphones are
connected.
I BI-AMP
Lights up when surround back speakers
selection is set to "BI-AMP" (page 106).
5 6 7
S –AIR
qa q; 9
Dolby Digital
Dolby Digital Surround EX
Dolby Digital Plus
Dolby TrueHD
DTS-HD Master Audio
DTS-HD High Resolution
Audio
DTS-HD Low Bit Rate
Audio
8
SP A B