Recording Using The Receiver - Sony STR-DN2010 Manual de instrucciones Operating Instructions Manual

Recording using the
receiver
You can record from a video/audio component
using the receiver. Refer to the operating
instructions supplied with your recording
component.
Recording onto a CD-R
You can record onto a CD-R using the
receiver. Refer to the operating instructions
supplied with your CD recorder.
1
Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR +/–
on the receiver.
2
Prepare the playback
component for playing.
For example, tune to the radio station you
want to record (page 61).
GB
60
3
4
Note
Sound adjustments do not affect the signal output
from the SA-CD/CD/CD-R AUDIO OUT jacks.
Recording with a video
Input
buttons
component
1
GUI MODE
2
V/v/B/b,
3
4
Prepare the recording
component.
Insert a blank CD-R into the CD recorder
and adjust the recording level.
Start recording on the
recording component, then
start playback on the playback
component.
Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR +/–
on the receiver.
Prepare the playback
component for playing.
For example, insert the video tape you
want to copy into the VCR.
Prepare the recording
component.
Insert a blank video tape, etc. into the
recording component (connected to
VIDEO 1 OUT jacks) for recording.
Start recording on the
recording component, then
start playback on the playback
component.