Sony STR-DN2010 Manual de instrucciones Operating Instructions Manual page 44

On setting up the active
subwoofer
• When a subwoofer is connected, turn on the
subwoofer and turn up the volume
beforehand. Turn the LEVEL to just before
the mid-point.
• If you connect a subwoofer with a crossover
frequency function, set the value to
maximum.
• If you connect a subwoofer with an auto
standby function, set it to off (deactivated).
Note
Depending on the characteristics of the subwoofer
you are using, the setup distance value may be
further away from the actual position.
GB
44
2: Performing Auto Calibration
MUTING/
1
Press GUI MODE.
After "GUI ON" appears on the display
for a while, the GUI menu appears on the
TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press V/v repeatedly to select
" Settings", then press
b.
The Settings menu list appears on the TV
screen.
?/1
Input
buttons
GUI
MODE
V/v/b,
MENU
MASTER
VOL +/–/
2
+/–
or