Sony STR-DN2010 Manual de instrucciones Operating Instructions Manual page 28

Connecting components without
HDMI jacks
Connect your video components according to
the table below.
Component
Blu-ray Disc player
DVD player
DVD recorder
Satellite tuner,
Cable TV tuner
VCR
Camcorder, video game, etc.
If you want to connect several
digital components, but cannot
find an unused input
See "Enjoying the sound/images from other
inputs (Input Assign)" (page 104).
Converting video signals
This receiver is equipped with a function for
converting video signals. For details, see
"Function for conversion of video signals"
(page 33).
Notes
• Before connecting cords, be sure to disconnect the
AC power cord (mains lead).
• It is not necessary to connect all the cords. Connect
according to the availability of jacks on the
connected components.
• Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. If the power supply
of the receiver is not turned on, neither video nor
audio signals will be transmitted.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
GB
28
Page
29
30
30, 32
31
32
32