Page 1 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Use this Help Guide when you have any questions on how to use the receiver. In this Help Guide, STR-DN1050 is used for illustration purposes unless when otherwise indicated. The picture above is of the STR-DN1050. Preparation...
Page 2 Setting whether to control this receiver from a device on the home network ......Using BLUETOOTH Features ......................Enjoying audio content stored on a BLUETOOTH device ............Using the Multi-Zone Features (for STR-DN1050 only) ..............Enjoying sound in two rooms ....................Using the Multi-Zone Features (for STR-DN1050 only) ............
Page 3 ........................HDMI Settings ........................Input Settings .......................... Network Settings ........................Bluetooth Settings ........................Zone Settings (for STR-DN1050 only) ..................System Settings ........................Using the menu on the display panel ..................Reverting to the factory default settings ................Parts and Controls ..........................
Page 4 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Supplied accessories Startup Guide (1) Reference Guide (1) Remote control (1) R03 (size AAA) batteries (2) FM wire antenna (aerial) (1) AM loop antenna (aerial) (1) Optimizer microphone (1) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 5 The correspondence of the INPUT jacks to the OUTPUT jacks is shown below. HDMI IN: HDMI OUT COMPONENT VIDEO IN (for STR-DN1050 only): HDMI OUT (*1), COMPONENT VIDEO MONITOR OUT (*2) VIDEO IN: HDMI OUT (*1), MONITOR OUT (*2) For STR-DN1050 only. Video signals are upconverted when output (up to 4K).
Page 6 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Digital audio formats supported by the receiver The digital audio formats that this receiver can decode depend on the digital audio output jacks of the connected device. This receiver supports the following audio formats. The words in brackets are those indicated on the display panel.
Page 7 These formats are compatible with MHL when you connect a MHL-compatible source device to the HDMI/MHL (VIDEO 2 IN) (for STR-DN1050 only), HDMI VIDEO 1 IN (MHL) (for STR-DN1050 only) or HDMI VIDEO IN (MHL) (for STR-DN850 only) jack. 4-488-938-11(3)
Page 8 All of the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies. If you want to connect several digital devices, but cannot find an unused input “Using other video/audio input jacks (Input Assign).” 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 9 Analog video signals input to the receiver’s VIDEO jack or COMPONENT VIDEO jacks can be output as HDMI signals (for STR-DN1050 only). Audio signals are not output from the HDMI OUT jack(s) while the image is being converted. This receiver supports High Bitrate Audio (DTS-HD Master Audio, Dolby TrueHD), Deep Color (Deep Colour), “x.v.Color (x.v.Colour),”...
Page 10 (MHL) (*1) or HDMI VIDEO IN (MHL) (*2) jacks of the receiver while the receiver is turned on, or while the receiver is turned off when [Pass Through] is set to [On] (*3) or [Auto], or [Network Standby] (*4) is set to [On]. For STR-DN1050 only For STR-DN850 only...
Page 11 You cannot use the surround back speakers and the front high speakers simultaneously. Related Topic Connecting speakers Connecting the speakers in zone 2 (for STR-DN1050 only) Connecting another amplifier in zone 2 (for STR-DN1050 only) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 12 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Connecting speakers Connect each speaker as illustrated below. Be sure to disconnect the AC power cord (mains lead) before connecting cables. For details on how to connect speaker cables to the receiver, see “How to connect speaker...
Page 13 Notes on connecting cables Using bi-amplifier connections Connecting the speakers in zone 2 (for STR-DN1050 only) Connecting another amplifier in zone 2 (for STR-DN1050 only) Selecting the speaker pattern and setting the assignment for the speaker terminals (Speaker Connection/SB Speaker...
Page 14 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Connecting the speakers in zone 2 (for STR-DN1050 only) You can enjoy sound from a device connected to the receiver in a zone other than the main zone. For example, you can watch a DVD in the main zone and listen to a CD in zone 2.
Page 15 Connecting a TV compatible with the Audio Return Channel (ARC) function via an HDMI connection HDMI cable (not supplied) Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Connecting a TV incompatible with the Audio Return Channel (ARC) function via an HDMI connection...
Page 16 Audio cable (not supplied) HDMI cable (not supplied) Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Connecting a TV without HDMI jacks The solid lines show recommended connections and the dashed lines show alternative connections.
Page 17 Component video cable (not supplied) Video cable (not supplied) Audio cable (not supplied) Optical digital cable (not supplied) Note Connect a TV monitor or a projector to the HDMI OUT or MONITOR OUT jack on the receiver. Depending on the status of the connection between the TV and the antenna (aerial), the image on the TV screen may be distorted.
Page 18 Controlling HDMI devices (Control for HDMI) Passing HDMI signals through (Pass Through) Setting the HDMI audio signal output of connected devices (Audio Out) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 19 Connecting a TV compatible with the Audio Return Channel (ARC) function via an HDMI connection HDMI cable (not supplied) Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Connecting a TV incompatible with the Audio Return Channel (ARC) function via an HDMI connection...
Page 20 Audio cable (not supplied) HDMI cable (not supplied) Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Connecting a TV without HDMI jacks The solid lines show recommended connections and the dashed lines show alternative connections.
Page 21 Video cable (not supplied) Audio cable (not supplied) Optical digital cable (not supplied) Note Connect a TV monitor or a projector to the HDMI TV OUT or MONITOR OUT jack on the receiver. Depending on the status of the connection between the TV and the antenna (aerial), the image on the TV screen may be distorted.
Page 22 DN1050)” or “Connecting devices with jacks other than HDMI jacks (for STR-DN850).” HDMI cable (not supplied) Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Satellite tuner, cable TV tuner PlayStation3 DVD recorder Super Audio CD player, CD player...
Page 23 The image quality depends on the connecting jack. We recommend that you connect your devices via an HDMI connection if they have HDMI jacks. Related Topic Notes on connecting cables Using HDMI connections Changing the name for each input (Name) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 24 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Connecting devices with jacks other than HDMI jacks (for STR-DN1050) Connect devices to the receiver as illustrated below. The solid lines show recommended connections and the dashed lines show alternative connections. Be sure to disconnect the AC power cord (mains lead) before connecting cables.
Page 25 The image quality depends on the connecting jack. We recommend that you connect your devices via an HDMI connection if they have HDMI jacks. Related Topic Notes on connecting cables Changing the name for each input (Name) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 26 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Connecting devices with jacks other than HDMI jacks (for STR-DN850) Connect devices to the receiver as illustrated below. The solid lines show recommended connections and the dashed lines show alternative connections. Be sure to disconnect the AC power cord (mains lead) before connecting cables.
Page 27 The image quality depends on the connecting jack. We recommend that you connect your devices via an HDMI connection if they have HDMI jacks. Related Topic Notes on connecting cables Changing the name for each input (Name) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 28 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Connecting an iPhone, iPod, or USB device Connect an iPhone, iPod or USB device as illustrated below. USB cable (not supplied) iPhone, iPod, or USB device 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 29 Front (for STR-DN1050 only) Rear Mobile device MHL cable (not supplied) Use an MHL 2-compliant cable. Sony recommends that you use an MHL cable made by Sony. MHL Direct Attach Device Related Topic Using MHL (Mobile High-Definition Link) connections 4-488-938-11(3)
Page 30 To prevent noise pickup, keep the AM loop antenna (aerial) away from the receiver and other devices. Be sure to fully extend the FM wire antenna (aerial). After connecting the FM wire antenna (aerial), keep it as horizontal as possible. Related Topic Notes on connecting cables 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 31 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Connecting another amplifier in zone 2 (for STR-DN1050 only) You can enjoy image (*) and sound from a device connected to the receiver in a zone other than the main zone. For example, you can watch a DVD in the main zone and listen to a CD in zone 2.
Page 32 Speakers Amplifier/receiver made by Sony HDMI cable (not supplied) Note To use this connection, set [Zone2 Out] in the HDMI Settings menu to [On]. Related Topic Notes on connecting cables 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 33 We recommend that you connect the server to the router with a wired connection. Server LAN cable (not supplied) Router Modem Internet Related Topic Notes on connecting cables System requirements for a wired LAN connection Setting up a wired LAN connection 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 34 Server Router Modem Internet Note Audio playback on a server may occasionally be interrupted if you use a wireless connection. Related Topic System requirements for a wireless LAN connection Selecting a wireless LAN connection method 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 35 If not, use a screwdriver to set the selector to the correct position before connecting the AC power cord (mains lead) to a wall outlet. The voltage selector may differ depending on the area. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 36 If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. When the receiver no longer responds to the remote control, replace both of the batteries with new ones. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 37 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Turning on the receiver When you have made all connections with the other devices, connect the AC power cord (mains lead), then turn on the receiver. 1. Connect the AC power cord (mains lead) to a wall outlet.
Page 38 If the Easy Setup screen does not appear or you want to display the Easy Setup screen manually, you can display it by selecting [Settings] - [Easy Setup] from the home menu. Related Topic Adjusting the sound balance automatically (Auto Calibration) Setting up a wired LAN connection Selecting a wireless LAN connection method 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 39 When [OPTIONS] appears in the lower right portion of the TV screen, you can display the function list by pressing OPTIONS and selecting a related function. To return to the previous screen, press RETURN. To exit the menu, press HOME to display the home menu, then press HOME again. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 40 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Enjoying video/sound from the connected device 1. Switch the input of the TV to the input to which the receiver is connected. 2. Press HOME. The home menu is displayed on the TV screen.
Page 41 To turn the volume up or down quickly Turn the knob quickly. Press and hold one of the buttons. To make fine adjustments Turn the knob slowly. Press one of the buttons and release it immediately. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 42 (4th and 5th generation) When using AirPlay iPhone: iPhone 5s/iPhone 5c/iPhone 5/iPhone 4s/iPhone 4/iPhone 3GS iPad: iPad (4th generation)/iPad mini/iPad (3rd generation)/iPad 2 iPod touch: iPod touch (3rd thorough 5th generation) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 43 STR-DN1050/STR-DN850 Notes on iPhone/iPod Sony cannot accept responsibility in the event that data recorded to an iPhone/iPod is lost or damaged when using an iPhone/iPod connected to this receiver. iPhone/iPod is charged when connected to the receiver while the receiver is turned on.
Page 44 Please wait as the function will recover after a short period of time. Related Topic Connecting an iPhone, iPod, or USB device 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 45 1. Tap/click icon on the iPhone/iPad/iPod screen or iTunes window. 2. Select [STR-DN1050] or [STR-DN850] on the AirPlay menu of iTunes or your iPhone/iPad/iPod. 3. Start playing back audio content on an iPhone/iPad/iPod or in iTunes. Controlling AirPlay playback You can use the +/–,...
Page 46 Compatible iPhone/iPod/iPad models 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 47 This receiver is displayed as [STR-DN1050] or [STR-DN850] . 5. Select [STR-DN1050] or [STR-DN850] on the BLUETOOTH device display. If [STR-DN1050] or [STR-DN850] is not displayed, repeat this process from step 1. 6. Check that the connection is completed and [BT] lights up on the display panel.
Page 48 Select [Bluetooth Pairing] in the Bluetooth Settings menu. Related Topic Controlling a BLUETOOTH device using the remote control Checking the information of a connected BLUETOOTH device Setting the Bluetooth Standby mode (Bluetooth Standby) Setting BLUETOOTH audio codecs (Bluetooth AAC/Bluetooth aptX) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 49 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Compatible USB devices and USB specifications Verified Sony USB devices You can use the following Sony USB devices on this receiver: Walkman: NW-A857/A860 NW-E053/E060/E083 NW-F800 NW-M505 NW-S756/S760/S770/S785 NW-WH303 NW-Z1000/Z1070 NWD-W260/W273 NWZ-A864 NWZ-B162F/B172/B183 NWZ-E053/E363/E373/E385/E463/E575/E585...
Page 50 32 kHz – 192 kHz, 16/24 bit PCM ALAC: 32 kHz - 96 kHz, 16/24 bit ALAC DSD (for STR-DN1050 only): 2.8 MHz, 1 bit DSD Compatibility with all encoding/writing software, recording devices and recording media cannot be guaranteed. The receiver does not play files encoded with DRM.
Page 51 Compatible USB device Mass Storage Class, High-speed type Maximum current 500 mA 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 52 The playback order for the receiver may differ from the playback order of the connected USB device. If folders that have no audio files are selected, [No Track] appears. When playing a very long track, some operations may cause playback delay. Related Topic USB message list 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 53 Please wait as the function will recover after a short period of time. Related Topic Connecting an iPhone, iPod, or USB device 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 54 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Listening to FM/AM radio You can listen to FM and AM broadcasts through the built-in tuner. Before operation, be sure you have connected the FM and AM antennas (aerials) to the receiver. 1. Select [Listen] - [FM TUNER] or [AM TUNER] from the home menu.
Page 55 6. Repeat steps 1 to 5 to store another station. You can store stations as follows: AM band: AM 1 to AM 30 FM band: FM 1 to FM 30 Related Topic Naming preset stations (Name Input) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 56 AM: 10 kHz (*) Europe and Australia FM: 50 kHz AM: 9 kHz The AM tuning scale can be changed. For details, see “ Changing the AM tuning scale (for USA, Canadian, and Mexican models only).” 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 57 The current AM tuning scale is changed to 9 kHz (or 10 kHz). To reset the scale to 10 kHz (or 9 kHz), repeat the procedure above. Note Depending on the settings, the receiver may take some time to change the AM tuning scale. All preset stations will be erased when you change the tuning scale. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 58 Some letters that can be displayed on the TV screen cannot be displayed on the display panel. Hint You can check the frequency while a Program Service name is displayed by pressing DISPLAY on the receiver repeatedly. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 59 You can also select [Sound Field] in [Sound Effects] from the home menu. You can also use A.F.D./2CH, MOVIE or MUSIC on the remote control or the receiver to select a sound field. Related Topic Resetting sound fields to the default settings 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 60 Be sure to use the buttons on the receiver to perform this operation. 1. Turn off the receiver. 2. Hold down MUSIC and press (on/standby) on the receiver. [S.F. CLEAR] appears on the display panel and all sound fields are reset to their default setting. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 61 Depending on the audio format, the receiver may play signals at a lower sampling frequency than the original sampling frequency of the input signals. Hint You can also select [Equalizer] in [Sound Effects] from the home menu. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 62 The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format. Hint You can also select [Sound Optimizer] in [Sound Effects] from the home menu. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 63 3. Select the setting you want. Full Flat: Makes the measurement of frequency from each speaker flat. Engineer: Sets to “the Sony listening room standard” frequency characteristics. Front Reference : Adjusts the characteristics of all of the speakers to match the characteristics of the front speaker.
Page 64 You can also use the PURE DIRECT button on the receiver to turn the Pure Direct function on or off. You can also select [Pure Direct] in [Settings] - [Audio Settings] from the home menu. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 65 You can keep the receiver up-to-date with an internet connection. You can control the receiver from your mobile device. “TV SideView” is available on Google Play and App Store. “SongPal” is available on Google Play and App Store. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 66 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Network features message list Network settings Invalid XXX (*): The entered value is incorrect or invalid. XXX represents an SSID, IP Address, Security Key, Subnet Mask, Default Gateway, Primary DNS, or Secondary DNS.
Page 67 Not available: The selected service is not available. An operation that is currently unavailable has been attempted. Feature currently unavailable.: An operation that is currently prohibited has been attempted. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 68 A server is a device which delivers music content to a DLNA device on a home network. A device that can be used as a server (a computer, etc.) must be connected to your wireless or wired LAN home network. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 69 Enter the values for [Subnet Mask], [Default Gateway], [Primary DNS] and [Secondary DNS], then select [Next]. Hint See [Information] when checking the network settings. Related Topic Connecting the receiver to the network using a LAN cable (for wired LAN connections only) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 70 A server is a device which delivers music content to a DLNA device on a home network. A device that can be used as a server (a computer, etc.) must be connected to your wireless or wired LAN home network. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 71 WPS method. For details, see the following topic: Method 4: Setting up a network connection by adding a new access point (manual setup method) Related Topic Connecting the receiver to the network using the wireless LAN antenna (for wireless LAN connections only) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 72 ] lights up on the display panel. Hint WPS (Wi-Fi Protected Setup) is a standard created by the Wi-Fi Alliance allowing you to set up a wireless network easily and securely. See [Information] when checking the network settings. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 73 WPS (Wi-Fi Protected Setup) is a standard created by the Wi-Fi Alliance allowing you to set up a wireless network easily and securely. See [Information] when checking the network settings. For details on entering the PIN code into the wireless LAN router/access point, refer to the operating instructions of your wireless LAN router/access point. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 74 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Method 3: Setting up a network connection by selecting an access point (Access Point Scan method) To set up the network using this connection method, you will be required to select or enter the following information.
Page 75 Note The security setting display in step 6 does not appear if your network has not been secured by encryption (using the security key). Hint See [Information] when checking the network settings. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 76 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Method 4: Setting up a network connection by adding a new access point (manual setup method) You can input the network name (SSID) you want manually if it does not appear on the list.
Page 77 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Enjoying audio content stored on a server on the home network (DLNA) You can play back audio content such as DSD, FLAC, WAV, AAC, MP3, etc., stored on a server on the home network using the receiver.
Page 78 Cannot connect to the network. A server does not appear in the server list. ([No server is available] appears on the TV screen.) Playback does not start, or does not automatically proceed to the next track or file. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 79 A server will appear in the server list even after being deleted from the list if the receiver finds it on the network (such as when you refresh the server list). Related Topic Enjoying audio content stored on a server on the home network (DLNA) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 80 Up to 20 devices can be set with either [Permit] or [Disable]. When 20 devices have been set, the newest device cannot be set. In this case, delete unnecessary devices from the list. Related Topic Deleting devices from the device list in DLNA Control Permission 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 81 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Enjoying music services offered on the Internet You can listen to music services offered on the Internet with this receiver. To use this function, the receiver must be connected to the Internet. Visit the website below for more information on the music services: http://www.sonyentertainmentnetwork.com...
Page 82 If [No service is available] appears, press OPTIONS and select [Refresh]. Hint The receiver displays the last selected service or station when the function is changed to the music services until the receiver is turned off. Related Topic Registering a new music service 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 83 The registration code of the receiver appears. Note Before disposing of the receiver, clear all memorized settings. For details, see “Reverting to the factory default settings.” If you use Music Unlimited, visit the website below and deregister the receiver. http://munlimited.com/home 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 84 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Registering a TV SideView device to the receiver You can control the receiver by touch-pad operation of a mobile device, tablet device, etc. with TV SideView installed. You need to register your mobile device to the receiver as a remote device (for the first time only).
Page 85 Connecting the receiver to the network using a LAN cable (for wired LAN connections only) Connecting the receiver to the network using the wireless LAN antenna (for wireless LAN connections only) Turning on the control mode for maintenance (External Control) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 86 1. Select [Settings] - [Network Settings] from the home menu. 2. Select [DLNA Control Permission]. 3. Select [Allow All Controllers]. 4. Select [On]. Related Topic Setting whether to control this receiver from a device on the home network (DLNA Control Permission) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 87 Even if the device supports the same profile, the functions may differ depending on the specifications of the BLUETOOTH device. The audio playback on this receiver may be delayed from that on the BLUETOOTH device because of the characteristics of the BLUETOOTH wireless technology. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 88 You can turn the BLUETOOTH function on or off. The NFC function is also turned on/off in conjunction with this setting. 1. Select [Settings] - [Bluetooth Settings] from the home menu. 2. Select [Bluetooth Power]. 3. Select [On] or [Off]. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 89 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Enjoying audio content stored on a BLUETOOTH device with a one-touch connection (NFC) You can enjoy audio content on a BLUETOOTH device with a one-touch connection using the NFC function. 1. Download the NFC Easy Connect application to your mobile device.
Page 90 Checking the information of a connected BLUETOOTH device Setting the Bluetooth Standby mode (Bluetooth Standby) Setting BLUETOOTH audio codecs (Bluetooth AAC/Bluetooth aptX) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 91 These operations may not be available for certain BLUETOOTH devices. The actual operations may also differ depending on the connected BLUETOOTH device. Related Topic Checking the information of a connected BLUETOOTH device Setting the Bluetooth Standby mode (Bluetooth Standby) Setting BLUETOOTH audio codecs (Bluetooth AAC/Bluetooth aptX) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 92 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Setting the speakers for zone 2 (for STR-DN1050 only) When the speakers in zone 2 are connected to the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B/ZONE 2 terminals of the receiver, configure the settings so that the sound selected in zone 2 is output from the speakers connected to the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B/ZONE 2 terminals.
Page 93 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Operating the receiver for zone 2 (for STR-DN1050 only) You can enjoy sound from the receiver in zone 2 by the following procedure. 1. Turn on the amplifier in zone 2. In the case of “Connecting the speakers in zone 2 (for STR-DN1050...
Page 94 AirPlay function is available in main zone only. Related Topic Turning on/off the power for zone 2 (Power) (for STR-DN1050 only) Selecting the source signals for zone 2 (Input) (for STR-DN1050 only) Adjusting the volume for zone 2 (Volume) (for STR-DN1050 only)
Page 95 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Setting the volume control for zone 2 (Lineout) (for STR-DN1050 only) You can set variable or fixed volume control for the ZONE 2 AUDIO OUT jacks. 1. Select [Settings] - [Zone Settings] from the home menu.
Page 96 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Setting the zone 2 HDMI output (Zone2 Out) (for STR-DN1050 only) When a device such as a TV or AV amplifier is connected to the HDMI ZONE 2 OUT jack, you can output HDMI signals from the device in zone 2.
Page 97 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Setting the priority for the main zone (Priority) (for STR-DN1050 only) When the Zone2 Out function is enabled and you select the same HDMI input for both the main zone and zone 2, there may be some interference to the audio and video signals in the main zone. To avoid possible interference, you can place priority on the main zone for HDMI input selection.
Page 98 STR-DN1050/STR-DN850 What is “BRAVIA” Sync? The “BRAVIA” Sync function allows communication between Sony products such as TVs, Blu-ray Disc players, DVD players, and AV amplifiers that support the Control for HDMI function. Control for HDMI is a mutual control function standard used by HDMI CEC (Consumer Electronics Control) for HDMI (High-Definition Multimedia Interface).
Page 99 7. Repeat steps 5 and 6 for other devices for which you want to use the Control for HDMI function. Note Perform the steps above again if you unplug the HDMI cable or change the connection. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 100 STR-DN1050/STR-DN850 Interlocking other devices using an HDMI connection (“BRAVIA” Sync) By connecting Sony devices that support the “BRAVIA” Sync using an HDMI cable (not supplied), operations are simplified as follows: Enjoying an input source from a connected device immediately (One-Touch Play)
Page 101 TV from the TV speaker and the speakers connected to the receiver. Related Topic Switching between digital and analog audio (Input Mode) Connecting a TV (for STR-DN1050) Connecting a TV (for STR-DN850) 4-488-938-11(3)
Page 102 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Switching the monitors that output the HDMI video signals (for STR-DN1050 only) If you have connected two monitors to the HDMI OUT A and HDMI OUT B jacks, you can switch the output for these two monitors using the HDMI OUTPUT button on the remote control.
Page 103 When [2ch Analog Direct] is being used, audio input is set to [Analog]. You cannot select other modes. Hint You can also use INPUT SELECTOR on the receiver to select the input in step 1. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 104 STR-DN1050: BD/DVD, GAME, SAT/CATV, VIDEO 1, VIDEO 2, SA-CD/CD STR-DN850: BD/DVD, GAME, SAT/CATV, VIDEO, SA-CD/CD OPT 1: STR-DN1050: BD/DVD, GAME, SAT/CATV (*), VIDEO 1, VIDEO 2, SA-CD/CD STR-DN850: BD/DVD, GAME, SAT/CATV (*), VIDEO, SA-CD/CD COAX: STR-DN1050: BD/DVD (*), GAME, SAT/CATV, VIDEO 1, VIDEO 2, SA-CD/CD...
Page 105 STR-DN850: BD/DVD, GAME, SAT/CATV, VIDEO, SA-CD/CD (*) None: STR-DN1050: BD/DVD, GAME (*), SAT/CATV, VIDEO 1 (*), VIDEO 2 (*), SA-CD/CD (*) STR-DN850: BD/DVD (*), GAME (*), SAT/CATV, VIDEO (*), SA-CD/CD Default setting Note When you assign the digital audio input, the Input Mode setting may change automatically.
Page 106 For example, by saving the settings in the [1: Movie] preset as follows, you can switch the settings of the receiver all at one time without switching each setting for [Input], [Calibration Type], and [Sound Field] individually. Input: BD/DVD Sound Field: HD-D.C.S. Calibration Type: No Change 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 107 You can recall the setting(s) saved for [1: Movie], [2: Music] or [3: Party] directly by pressing CUSTOM PRESET 1, CUSTOM PRESET 2, or CUSTOM PRESET 3 on the remote control. Related Topic Items for which you can save settings and the default values for each item 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 108 When you select [3: Party], zone 2 is turned on automatically and you can simultaneously enjoy the same music as the main zone. Related Topic Items for which you can save settings and the default values for each item 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 109 1: Movie Input: BD/DVD Tuner Preset: No Change Volume: No Change HDMI OUT: No Change Party Mode (for STR-DN1050 only): No Change Sleep: No Change Sound Field: HD-D.C.S. Sound Optimizer: No Change Pure Direct: No Change Calibration Type: No Change...
Page 110 4: Night Input: No Change Tuner Preset: No Change Volume: 11 HDMI OUT: No Change Party Mode (for STR-DN1050 only): No Change Sleep: 30 min Sound Field: No Change Sound Optimizer: Normal Pure Direct: No Change Calibration Type: No Change...
Page 111 For details on performing this function, see the following topics: Before you perform Auto Calibration Connecting the optimizer microphone Selecting the front speakers Performing Auto Calibration Related Topic About Auto Calibration Confirming active subwoofer setup 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 112 After you have made the bi-amplifier connection, set [SB Speaker Assign] in the Speaker Settings menu to [Bi-Amp]. Note You can only set [SB Speaker Assign] if the speaker pattern is set to a setting that does not have surround back and front high speakers. Related Topic Notes on connecting cables 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 113 To check the remaining time before the receiver turns off, repeat steps 1 to 4. The remaining time appears on the display panel. The sleep timer will be canceled if you perform the following: Update the software of the receiver. Press (on/standby). 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 114 [PURE.DIRECT] appears on the display panel when the Pure Direct function is activated. Stream information may not be displayed. Note Characters or marks in some languages may not be displayed. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 115 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Performing Auto Calibration You can perform automatic calibration from where you are sitting. 1. Select [Settings] - [Speaker Settings] from the home menu. 2. Select [Auto Calibration]. 3. Follow the instructions on the TV screen, then press to select [Start].
Page 116 Before you perform Auto Calibration Checking Auto Calibration results 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 117 [2ch Analog Direct] is being used. Headphones are connected. [Auto Calibration] has not been performed. The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 118 1. Select [Settings] - [Speaker Settings] from the home menu. 2. Select [Speaker Connection]. 3. Select the speaker pattern you want. 4. Set [SB Speaker Assign] to any of the following settings (*). Zone2 (for STR-DN1050 only) When using the zone 2 connection. Bi-Amp When using the bi-amplifier connection.
Page 119 1. Select [Settings] - [Speaker Settings] from the home menu. 2. Select [Level/Distance/Size]. 3. Select the speaker on the screen for which you want to adjust the speaker level. 4. Select [Level] and then press to adjust the level. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 120 3. Select the speaker on the screen for which you want to adjust the distance from where you are sitting. 4. Select [Distance] and then press to adjust the distance. Note Some parameters may not be available depending on the speaker pattern setting. Hint When headphones are connected, [Distance] cannot be set. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 121 When the front speakers are set to [Small], the center, surround, and surround back/front high speakers are also automatically set to [Small]. If you do not use the subwoofer, the front speakers are automatically set to [Large]. [Size] cannot be set when headphones are connected. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 122 3. Select the speaker for which you want to adjust the crossover frequency on the screen. 4. Press to set the crossover frequency. Note This function does not work when headphones are connected. The surround back speakers will be set to the same setting as that of the surround speakers. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 123 4. Adjust the speaker level. Hint To adjust the level of all speakers at the same time, press +/–. You can also use MASTER VOLUME on the receiver. The adjusted value is shown on the TV screen during adjustment. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 124 Headphones are connected. There is no center speaker. There are no front high speakers. The [2ch Stereo], [2ch Analog Direct], and [Multi Stereo] sound fields are being used. A sound field for music is being used. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 125 You can select the unit of measurement for setting distances. 1. Select [Settings] - [Speaker Settings] from the home menu. 2. Select [Distance Unit]. 3. Select the setting you want. meter: The distance is displayed in meters. feet: The distance is displayed in feet. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 126 STR-DN1050/STR-DN850 Playing audio signals with high-quality sound (Digital Legato Linear (D.L.L.)) The D.L.L. function is Sony proprietary technology that allows low-quality digital and analog audio signals to be played with high-quality sound. 1. Select [Settings] - [Audio Settings] from the home menu.
Page 127 3. Select the setting you want. On: Always activates the low-pass filter with a cutoff frequency of 120 Hz. Off: Does not activate the low-pass filter. Note This function does not work when [2ch Analog Direct] is being used. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 128 0 ms – 300 ms: You can adjust the delay from 0 ms to 300 ms in 10 ms intervals. Note The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 129 Be sure to reduce the volume level before you turn this function on or off. The Advanced Auto Volume function may not work, depending on the audio format. This function does not work when [2ch Analog Direct] is being used. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 130 Sub: Sound in the sub language will be output. Main/Sub: Sound in the main language will be output through the front left speaker and sound in the sub language will be output through the front right speaker simultaneously. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 131 Auto: The dynamic range is compressed automatically when there is a flag in the sound source that recommends using the Dynamic Range Compressor function. On: The dynamic range is compressed as intended by the recording engineer. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 132 Auto: Enables video scaling control of 4K HDMI output automatically if you connect a 4K-compatible TV. Note This function works only when video signals from the VIDEO IN, COMPONENT VIDEO IN (for STR-DN1050 only), or HDMI IN jacks are being received. HDMI video input signals must be 1080p/24 Hz.
Page 133 When you set [Control for HDMI] to [On], [Audio Out] may be changed automatically. When the receiver is in standby mode, the (on/standby) indicator on the front panel lights up in amber if [Control for HDMI] is set to [On]. Related Topic Preparing for “BRAVIA” Sync 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 134 Auto: The receiver outputs HDMI signals to the TV from the HDMI OUT jack when the TV is turned on while the receiver is in the standby mode. Sony recommends this setting if you are using a “BRAVIA” Sync-compatible Sony TV. This setting saves power in the standby mode compared to the [On] setting.
Page 135 TV, even when playing back multi-channel source. When you connect the receiver to a video device (projector, etc.), sound may not be output from the receiver. In this case, select [AMP]. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 136 Auto: Automatically sets the level to 0 dB or +10 dB, depending on the audio stream. +10 dB 0 dB Note This setting is invalid when [FM TUNER], [AM TUNER], [USB], [Bluetooth], [Home Network], or [Music Services] is selected. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 137 1. Select [Settings] - [HDMI Settings] from the home menu. 2. Select [Fast View]. 3. Select the setting you want. Auto: You can select HDMI input faster than normal selection. Off: The Fast View function is not available. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 138 This allows you to turn the function that automatically switches input to the MHL device input on or off when the MHL device is played. 1. Select [Settings] - [HDMI Settings] from the home menu. 2. Select [MHL Auto Input]. 3. Select [On] or [Off]. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 139 L: Displays an input to the Listen menu. W/L: Displays an input to both the Watch and Listen menus. COMPONENT (for STR-DN1050 only) You can set the video input jack(s) assigned to each input. For details, see “Using other video/audio input jacks (Input Assign).”...
Page 140 2. Select the input name you want to change. 3. Select [Name]. An on-screen keyboard appears on the TV screen. 4. Press to select characters one by one to enter the name. 5. Select [Enter]. The name you entered is registered. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 141 Turning on/off the Wi-Fi function (Wi-Fi) 1. Select [Settings] - [Network Settings] from the home menu. 2. Select [Wi-Fi]. 3. Set to [On] or [Off]. Note You cannot change this setting when a LAN cable is connected to the receiver. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 142 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Setting up a network (Internet Setting) You can set up a network connection. For details on Internet Setting, see “Setting up a wired LAN connection” or “Selecting a wireless LAN connection method.” 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 143 You can check the settings (*) for [Connection Type], [Connection Status], [IP Address Setting], [IP Address], [SSID], [Security Type], [Subnet Mask], [Default Gateway], [DNS Settings], [Primary DNS], [Secondary DNS], and [MAC Address]. The setting items during setup differ depending on the network environment and connection type. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 144 1. Select [Settings] - [Network Settings] from the home menu. 2. Select [Device Name]. An on-screen keyboard appears on the TV screen. 3. Press to select characters one by one to enter the name. 4. Select [Enter]. The name you entered is registered. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 145 Setting control permissions to all devices on the home network (DLNA Control Permission) Setting whether to control this receiver from a device on the home network (DLNA Control Permission) Controlling the receiver using a smartphone or tablet device (SongPal) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 146 Off : The network function turns off when the receiver is in standby mode. The receiver takes more time to resumes operation when powered on again. Note When the receiver is in standby mode, the (on/standby) indicator on the front panel lights up in amber if [Network Standby] is set to [On]. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 147 Setting control permissions to all devices on the home network (DLNA Control Permission) Setting whether to control this receiver from a device on the home network (DLNA Control Permission) Registering a TV SideView device to the receiver 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 148 You can activate the pairing mode of the receiver. 1. Select [Settings] - [Bluetooth Settings] from the home menu. 2. Select [Bluetooth Pairing]. For details on subsequent procedures, see step 4 onwards in “Enjoying audio content stored on a BLUETOOTH device.” 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 149 (on/standby) indicator on the front panel lights up in amber if [Bluetooth Standby] is set to [Yes]. You can only select this parameter when a BLUETOOTH device is paired. Hint You can select [Bluetooth Standby] in [Settings] - [Bluetooth Settings] from the home menu. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 150 You can enjoy high-quality sound if AAC or aptX is enabled. When you change this setting, the BLUETOOTH device is disconnected from the receiver automatically. Hint You can select [Bluetooth AAC] or [Bluetooth aptX] in [Settings] - [Bluetooth Settings] from the home menu. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 151 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Turning on/off the power for zone 2 (Power) (for STR-DN1050 only) You can turn on or off the power for zone 2 by the following procedure. 1. Select [Settings] - [Zone Settings] from the home menu.
Page 152 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Selecting the source signals for zone 2 (Input) (for STR-DN1050 only) You can select the source signals for zone 2 using the following procedure. 1. Select [Settings] - [Zone Settings] from the home menu.
Page 153 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Adjusting the volume for zone 2 (Volume) (for STR-DN1050 only) You can adjust the volume for zone 2 using the following procedure in the following cases: When using the connections described in “Connecting the speakers in zone 2 (for STR-DN1050 only).”...
Page 154 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Selecting the language (Language) You can select the language of messages on the screen. 1. Select [Settings] - [System Settings] from the home menu. 2. Select [Language]. 3. Select the language you want. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 155 This function allows you to turn the information display which appears on the TV screen on or off when the volume level or sound field, etc. of the receiver is changed. 1. Select [Settings] - [System Settings] from the home menu. 2. Select [Auto Display]. 3. Select [On] or [Off]. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 156 [FM TUNER] or [AM TUNER] is selected as the input. The software of the receiver is being updated. If you use the Auto Standby mode and the sleep timer at the same time, the sleep timer has priority. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 157 2. Select [Software Update Notification]. 3. Set to [On] or [Off]. Note New software version information does not appear in the following cases: The latest version is already being used. The receiver cannot obtain data via a network. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 158 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Checking the software version (Software Version) You can check the current software version of the receiver. 1. Select [Settings] - [System Settings] from the home menu. 2. Check [Software Version]. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 159 Once you start the update, you cannot restore the previous software version. If you try to update the software when the sleep timer is on, the sleep timer will turn off automatically. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 160 To exit the menu Press AMP MENU. Note Some parameters and settings may appear dimmed on the display panel. This means that they are either unavailable or fixed and unchangeable. Related Topic Menu list (on the display panel) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 161 [CLEARING] appears on the display panel for a while, then changes to [CLEARED!] . Note It takes a few minutes for the memory to be cleared completely. Do not turn the receiver off until [CLEARED!] appears on the display panel. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 162 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Front panel (STR-DN1050) (on/standby) 2. SPEAKERS 3. CONNECTION PAIRING BLUETOOTH Operates the BLUETOOTH function. 4. TUNER PRESET +/– 5. NFC sensor 6. A.F.D./2CH, MOVIE, MUSIC 7. Display panel 8. DISPLAY View information on the display panel.
Page 163 (*1), and [Bluetooth Standby] are set to [Off], and the receiver in zone 2 is turned off. For USA, Canadian, and Australian models only For USA, Canadian, Mexican, and Australian models only Note The indicator flashes slowly when a software update is in progress. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 164 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Front panel (STR-DN850) (on/standby) 2. SPEAKERS 3. TUNING MODE, TUNING +/– Press TUNING MODE to operate a tuner (FM/AM). Press TUNING +/– to scan a station. 4. NFC sensor 5. A.F.D./2CH, MOVIE, MUSIC 6.
Page 165 (*1), and [Bluetooth Standby] are set to [Off]. For USA, Canadian, and Australian models only For USA, Canadian, Mexican, and Australian models only Note The indicator flashes slowly when a software update is in progress. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 166 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Rear panel (STR-DN1050) 1. FM ANTENNA terminal 2. AM ANTENNA terminal 3. IR REMOTE IN/OUT jacks You can control the receiver from a distance by connecting an IR repeater (not supplied) to the IR REMOTE IN jack.
Page 167 You must connect your TV to HDMI OUT to watch images from the selected input. You can also use this port for maintenance and service. You must connect your TV to MONITOR OUT to watch images from the selected input. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 168 The applicable indicator lights up when the receiver is decoding the corresponding DTS format signals. DTS: DTS DTS-HD: DTS-HD 6. Speaker system indicator 7. Tuning indicator Lights up when the receiver tunes to a stereo broadcast. 8. HDMI OUT A + B (for STR-DN1050 only) 9. SLEEP...
Page 169 PL: Dolby Pro Logic PLII: Dolby Pro Logic II PLIIx: Dolby Pro Logic IIx 15. ZONE2 (for STR-DN1050 only) Lights up while the power for zone 2 is turned on. 16. A.P.M. Lights up when the A.P.M. (Automatic Phase Matching) function is activated. You can only set the A.P.M. function in the D.C.A.C.
Page 170 Set [Control for HDMI], [Pass Through], [Network Standby] (for USA, Canadian, and Australian models only), and [Bluetooth Standby] to [Off]. Turn off the receiver in zone 2 (for STR-DN1050 only). 2. Input buttons Select the device you want to use.
Page 171 Adjust the volume level of all speakers at the same time. 11. HDMI OUTPUT Switches the output for two monitors connected to the HDMI OUT A and HDMI OUT B jacks (for STR-DN1050 only). Turns the output for HDMI TV OUT on/off (for STR-DN850 only).
Page 172 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Specifications POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (USA model only) STR-DN1050: With 6 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output.
Page 173 Digital (Coaxial): Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Digital (Optical): S/N: 100 dB (A, 20 kHz LPF) Output (Analog) ZONE 2 (for STR-DN1050 only): Voltage: 2 V/1 kilohm SUBWOOFER: Voltage: 2 V/1 kilohm Equalizer Gain levels: ±10 dB, 1 dB step...
Page 174 Video: 1 Vp-p, 75 ohms COMPONENT VIDEO (for STR-DN1050 only): Y: 1 Vp-p, 75 ohms PB: 0.7 Vp-p, 75 ohms PR: 0.7 Vp-p, 75 ohms 80 MHz HD Pass Through HDMI Video Input/Output (HDMI Repeater block) 4096 × 2160p @ 59.94/60 Hz: 2D (*1) 4096 ×...
Page 175 3D: Over-Under (Top-and-Bottom) (*3) 1920 × 1080p @ 25 Hz: 2D (*3) 3D: Frame packing 3D: Side-by-Side (Half) (*3) 3D: Over-Under (Top-and-Bottom) (*3) 1920 × 1080p @ 23.98/24 Hz: 2D (*3) 3D: Frame packing 3D: Side-by-Side (Half) (*3) 3D: Over-Under (Top-and-Bottom) (*3) 1920 ×...
Page 176 3D: Over-Under (Top-and-Bottom) (*3) 720 × 480p @ 59.94/60 Hz: 2D (*3) 720 × 576p @ 50 Hz: 2D (*3) 640 × 480p @ 59.94/60 Hz: 2D (*3) Supports YUV 4:2:0 / 8 bit format only. Supports 8 bit format only. These formats are also supported by MHL connection.
Page 177 For USA, Canadian, and Australian models only Dimensions (width/height/depth) (Approx.) STR-DN1050: 430 mm × 172 mm × 329.4 mm (17 in × 6 7/8 in × 13 in) 430 mm × 156 mm × 329.4 mm (17 in × 6 1/4 in × 13 in) including projecting parts and controls Mass (Approx.)
Page 178 STR-DN850: 8.0 kg (17 lb 11 oz) Design and specifications are subject to change without notice. Related Topic Compatible USB devices and USB specifications Compatible iPhone/iPod/iPad models 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 179 MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of MHL Licensing, LLC. The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective...
Page 180 The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Android™ is a trademark of Google Inc. Google Play™ is a trademark of Google Inc. “Spotify” and “Spotify” logos are trademarks of the Spotify Group. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 181 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Software License Information WPA Supplicant Copyright (c) 2003-2013, Jouni Malinen <j@w1.fi> and contributors All Rights Reserved. This program is licensed under the BSD license (the one withadvertisement clause removed). If you are submitting changes to the project, please see CONTRIBUTIONS file for more instructions.
Page 182 products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;...
Page 183 received by Licensor and subsequently incorporated within the Work. 2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.
Page 184 exercise of permissions under this License. 8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or...
Page 185 "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).
Page 186 addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License. You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.
Page 187 Expat Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:...
Page 188 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Page 189 without the prior written consent of the Author. Any subroutines or modules supplied by You and linked into the Source Code or Executable Files this Work shall not be considered part of this Work and will not be subject to the terms of this License. Patent License.
Page 190 License. Individuals or entities who have received Derivative Works from You under this License, however, will not have their licenses terminated provided such individuals or entities remain in full compliance with those licenses. Sections 1, 2, 6, 7, 8, 9, 10 and 11 will survive any termination of this License. If You bring a copyright, trademark, patent or any other infringement claim against any contributor over infringements You claim are made by the Work, your License from such contributor to the Work ends automatically.
Page 191 SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. libvorbis http://www.xiph.org/vorbis/ Copyright (c) 2002-2004 Xiph.org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Page 192 Copyright (c) 2002, Xiph.org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Page 193 M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. M.I.T. makes no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 194 After checking the above items and fixing any problems, plug in the AC power cord (mains lead) and turn on the receiver. If the problem persists, consult your nearest Sony dealer. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 195 USB FAIL An over-current from the (USB) port was detected. The receiver will automatically turn off after a few seconds. Check the iPhone/iPod or USB device, then unplug it and turn on the power again. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 196 Warning 43: The distance and position of a subwoofer cannot be detected. This may be caused by noise. Try performing the measurement in a quiet environment. NO WARNING: There is no warning information. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 197 An incompatible iPhone or iPod is connected. No device is connected: No iPhone or iPod is connected. No Track: No track was found. Headphone is not supported: No sound is output from the headphones when an iPhone or iPod is connected. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 198 Cannot play: The receiver cannot play the audio file due to an incompatible file format or playback restrictions. Not in use: An operation that is currently prohibited has been attempted. No Track: No track was found. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 199 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 The receiver is turned off automatically. [Auto Standby] is set to [On]. The sleep timer function was activated. [PROTECTOR] was activated. Related Topic Setting standby mode (Auto Standby) Using the sleep timer PROTECTOR 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 200 The output of the HDMI video signals of the receiver may be set to [HDMI OFF]. In this case, set to [HDMI ON] (for STR-DN850 only). set to [HDMI A], [HDMI B], or [HDMI A + B] (for STR-DN1050 only). 4-488-938-11(3)
Page 201 No 3D image appears on the TV. Depending on the TV or the video device, 3D images may not be displayed. Check the HDMI video formats supported by the receiver. Be sure to use a High Speed HDMI cable. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 202 Depending on the TV or the video device, 4K images may not be displayed. Check the video capability and settings of your TV and video device. Also, make sure you connect the video device to the 4K-compatible HDMI IN jack of this receiver. Be sure to use a High Speed HDMI cable. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 203 One-Touch Play operation, or turn on the receiver to select the HDMI device from which you want to enjoy content. Make sure [Pass Through] is set to [On] (For USA, Canadian, Mexican, and Australian models only) or [Auto] in the HDMI Settings menu. Related Topic Passing HDMI signals through (Pass Through) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 204 Press HOME to turn the GUI on. Check that the TV is connected correctly. Depending on the TV, the GUI menu may take some time to appear on the TV screen. For STR-DN1050 only For STR-DN850 only 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 205 The display panel is turned off. If the PURE DIRECT indicator on the front panel lights up, press PURE DIRECT to turn off this function. Press DIMMER on the receiver to adjust the brightness of the display panel. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 206 [AMP]. However, the sound will not be output through the TV speaker. Sound may be interrupted when the sampling frequency, number of channels or audio format of audio output signals from the playback device is switched. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 207 Check that the connecting cables are not near a transformer or motor, and are at least 3 meters (10 feet) away from a TV set or fluorescent light. Move your audio device away from the TV. The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 208 Depending on the selected sound field, sound may not be available from the subwoofer. There is no sound from the subwoofer when all speakers are set to [Large] and [Neo:6 Cinema] or [Neo:6 Music] is selected. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 209 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 There is no sound from a specific device. Check that the device is correctly connected to the corresponding audio input jacks. Check that the cable(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the device.
Page 210 Check that the selected digital audio input jack is not assigned to another input. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 211 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 The left and right sound is unbalanced or reversed. Check that the speakers and device are connected correctly and securely. Adjust the sound level parameters using the Speaker Settings menu. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 212 Set [Audio Out] to [AMP] in the HDMI Settings menu. You can only enjoy High Bitrate Audio (DTS-HD Master Audio, Dolby TrueHD), DSD and Multi Channel Linear PCM with an HDMI connection. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 213 Make sure you have selected a sound field for movies or music. [PLII Movie], [PLII Music], [PLIIx Movie], [PLIIx Music], [Neo:6 Cinema] and [Neo:6 Music] do not work when the speaker pattern is set to 2/0 or 2/0.1. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 214 A test tone is not output from the speakers. The speaker cables may not be connected securely. Check that they are connected securely and cannot be disconnected by pulling on them slightly. The speaker cables may have short-circuited. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 215 A test tone is output from a different speaker than the speaker displayed on the TV screen. The speaker pattern setup is incorrect. Make sure that the speaker connections and the speaker pattern match correctly. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 216 Play operation, or turn on the receiver to select the HDMI device from which you want to enjoy content. Make sure [Pass Through] is set to [On] (For USA, Canadian, Mexican, and Australian models only) or [Auto] in the HDMI Settings menu. Related Topic Passing HDMI signals through (Pass Through) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 217 The FM reception is poor. Use a 75-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM antennas (aerial) as shown below. Receiver Outdoor FM antenna (aerial) Related Topic The FM stereo reception is poor. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 218 2. Select a station on the FM band. 3. Press OPTIONS. 4. Select [STEREO/MONO] from the menu. 5. Select [MONO]. Note You can set FM mode in the options menu if the frequency indication is selected in step 3. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 219 No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations is used). Preset the stations. Press DISPLAY on the receiver repeatedly so that the frequency appears on the display panel. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 220 RDS does not work (for European and Australian models only). Make sure that you are tuned to an FM RDS station. Select a stronger FM station. The station you tuned to is not transmitting the RDS signal or the signal is weak. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 221 The RDS information that you want does not appear (for European and Australian models only). The service may be temporarily out of order. Contact the radio station and find out whether they actually provide the service in question. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 222 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 The sound is distorted. Press - on the remote control repeatedly. You can also use MASTER VOLUME on the receiver. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 223 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 There is no sound from an iPhone/iPod. Disconnect the iPhone/iPod and connect it again. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 224 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 An iPhone/iPod cannot be charged. Check that the receiver is turned on. Make sure the iPhone/iPod is connected securely. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 225 Depending on the content of the iPhone/iPod, it may take time to start playback. Turn off the receiver, then disconnect the iPhone/iPod. Turn on the receiver again and reconnect the iPhone/iPod. You are using an incompatible iPhone/iPod. See “Compatible iPhone/iPod/iPad models” for the compatible device types. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 226 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 The ringtone volume of an iPhone does not change. Adjust the ring volume using the controls on the iPhone. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 227 The USB device is not recognized. File or folder names are not displayed on this receiver. Playback is not possible. The sound skips. There is noise. Distorted sound is output. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 228 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 There is noise, skipping, or distorted sound. Turn off the receiver, reconnect the USB device, and then turn on the receiver. The music data itself contains noise, or the sound is distorted. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 229 Turn off the receiver, then disconnect the USB device. Turn on the receiver again and reconnect the USB device. Connect a compatible USB device. The USB device does not work properly. Refer to the section on how to deal with this problem in the operating instructions of the USB device. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 230 STR-DN1050/STR-DN850 Playback does not start. Turn off the receiver, reconnect the USB device, and then turn on the receiver. Connect a compatible USB device. Select [USB] and select a folder/track, then press to start playback. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 231 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 A USB device cannot be connected to the USB port. The USB device is being connected upside down. Connect the USB device in the correct orientation. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 232 Upper case letters (A to Z) Lower case letters (a to z) Numbers (0 to 9) Symbols (’ = < > * + , – . / @ [ \ ] _ `) Other characters may not be displayed correctly. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 233 The file structure is extremely complex. The memory capacity is excessive. The internal memory is fragmented. We therefore recommend following these guidelines: Total folders on USB device: 256 or less (including [ROOT] folder) Total files per folder: 256 or less. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 234 Files that are encrypted, protected by passwords, etc. cannot be played. The receiver supports FAT16 and FAT32, but some USB devices may not support these FAT systems. For details, refer to the operating instructions of each USB device or contact the manufacturer. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 235 Cannot connect to the network using WPS via a wireless LAN connection. You cannot connect to a network using WPS if your access point is set to WEP. Set up your network after searching the access point using the access point scan. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 236 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 An error message appears. Check the nature of the error. See “Network features message list.” 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 237 Wireless networks are influenced by electromagnetic radiation emitted by microwave ovens and other devices. Move the receiver away from these devices. Related Topic Checking the network information (Information) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 238 The TV SideView device may have been deleted from the receiver. Delete the receiver from the TV SideView device and then re-register the receiver. Related Topic Registering a TV SideView device to the receiver 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 239 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Cannot select the Network Settings menu. Wait for a few moments after you have turned on the receiver, and then select the Network Settings menu again. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 240 If the system is connected to a wireless network, move the receiver and the wireless LAN router/access point closer to each other. If you have initialized the receiver or performed a system recovery on your server, perform the network settings again. Related Topic Checking the network information (Information) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 241 Refer to the operating instructions of your router or wireless LAN router/access point and check the multicast setting. Try turning the multicast setting on or off on the wireless LAN router/access point. If your server is an software application on your PC, confirm the firewall setup and the security software settings. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 242 Audio content with DRM (Digital Rights Management) copyright protection cannot be played on this receiver. Make sure that “repeat one,” “repeat all,” and “shuffle” are configured correctly. Press OPTION, then select [Repeat] or [Shuffle] to set to the playback mode. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 243 Depending on the network environment, it may not be possible to play tracks with more than one device operating at the same time. Turn off other devices to enable the receiver to play tracks. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 244 Confirm that the receiver and the server are connected to the router or the wireless LAN router/access point correctly. Audio content with DRM (Digital Rights Management) copyright protection cannot be played on this receiver. There may be some tracks that cannot be played on this receiver. Related Topic Compatible formats with DLNA 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 245 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 [No Track] appears. If there are no folders or files that can be played on the receiver in the selected folder, you cannot expand the folder to display its contents. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 246 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Cannot play copyrighted files. Audio content with DRM (Digital Rights Management) copyright protection cannot be played on this receiver. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 247 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Cannot select a previously selected track. The track information may have been changed on the server. Refresh the server list and then reselect the server. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 248 Changing the settings [External Control] is set to [Off]. Set it to [On] to control the receiver with “SongPal.” TV SideView is not registered. TV SideView Registration is required to control the receiver with TV SideView. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 249 The receiver itself does not support the Wake-on-LAN. Set [Network Standby] to [On] if you want to turn the receiver on by operating the devices on a network (for USA, Canadian, and Australian models only). 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 250 The receiver cannot be found from an iPhone/iPad/iPod or iTunes. Make sure the iPhone/iPad/iPod or computer with iTunes is connected to your home network. Update the software of the receiver and the iPhone/iPad/iPod or iTunes to the latest version. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 251 The sound may skip depending on factors such as the network environment. Depending on the audio files, playback may require network speed. If you use a wired LAN connection, check the network hub and/or router. If you use a wireless LAN connection, check the access point and/or router. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 252 Update the software of the iPhone/iPad/iPod or iTunes to the latest version. Update the software of the receiver to the latest version. Connection between the AirPlay device and receiver may be lost. Restart the AirPlay device and/or the receiver. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 253 If your contract with your Internet provider limits Internet connection to one device at a time, this device will not be able to access the Internet when another device is already connected. Consult your carrier or service provider. Related Topic Checking the network information (Information) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 254 The sound skips. The bandwidth of your network may be too low. If using wireless LAN connection, move the receiver and the wireless LAN router/access point closer to each other, without any obstructions between them. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 255 Pairing may not be possible if there are other BLUETOOTH devices near the receiver. In this case, turn off the other BLUETOOTH devices. Correctly enter the same passkey that was entered on the BLUETOOTH device. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 256 While connected to a BLUETOOTH device, this receiver cannot be detected and a connection cannot be established from another BLUETOOTH device. Erase the pairing registration information of the BLUETOOTH device and perform the pairing operation again. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 257 If there are obstructions between the receiver and your BLUETOOTH device, remove these or move the receiver and/or device avoid them. If there is a device that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move it away. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 258 STR-DN1050/STR-DN850 The sound of your BLUETOOTH device cannot be heard on the receiver. Turn up the volume on your BLUETOOTH device first, and then adjust the volume using + (or MASTER VOLUME on the receiver). 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 259 If there is a device that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move it away. Turn down the volume of the connected BLUETOOTH device. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 260 AV receivers (audio systems): up to 1 device Make sure your TV is connected to the HDMI OUT A jack of the receiver (for STR-DN1050 only). Make sure the HDMI OUTPUT setting is set to [HDMI A] or [HDMI A + B] (for STR-DN1050 only). 4-488-938-11(3)
Page 261 If your TV has multiple HDMI input jacks, make sure the receiver is connected to the one supports the ARC function. Make sure your TV is connected to the HDMI OUT A jack of the receiver (for STR-DN1050 only). Make sure the HDMI OUTPUT setting is set to [HDMI A] or [HDMI A + B] (for STR-DN1050 only). Related Topic...
Page 262 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 An MHL-compatible source device cannot be charged. Check that the receiver is turned on. Make sure the device is connected securely. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 263 Check the settings of your device. For details, refer to the operating instructions of your device. Check that the device is connected via an MHL cable to the HDMI/MHL (VIDEO 2 IN) (*1), HDMI VIDEO 1 IN (MHL) (*1) or HDMI VIDEO IN (MHL) (*2) jacks. For STR-DN1050 only For STR-DN850 only 4-488-938-11(3)
Page 264 Point the remote control at the remote control sensor on the receiver. Remove any obstructions between the remote control and the receiver. Replace both of the batteries in the remote control with new ones if they are weak. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 265 Refer to the following websites for the latest information on the receiver. For customers in the USA: http://esupport.sony.com/ For customers in Canada: http://esupport.sony.com/CA/ For customers in Latin America: http://esupport.sony.com/LA For customers in Europe: http://support.sony-europe.com/ For customers in Australia: http://www.sony-asia.com/support 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 266 Front speaker (Left) Front speaker (Right) Center speaker Surround speaker (Left) Surround speaker (Right) Subwoofer Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 267 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 7.1-channel speaker system using surround back speakers You can enjoy high-fidelity reproduction of recorded sound from DVD or Blu-ray Disc software in 6.1-channel or 7.1- channel format. Front speaker (Left) Front speaker (Right)
Page 268 Place the surround back speakers as shown in the illustration below. The angles shown by should be the same. Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 269 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 7.1-channel speaker system using front high speakers You can enjoy vertical sound effects by connecting additional two front high speakers. Front speaker (Left) Front speaker (Right) Center speaker Surround speaker (Left) Surround speaker (Right)
Page 270 2. Place the front high speakers at height angle of 20° ± 5°. Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 271 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 How to connect speaker cables Connect speaker cables as illustrated below. Strip the jacket to 10 mm (13/32 in) at each end of the speaker cables. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 272 You can check the BLUETOOTH device information by pressing DISPLAY on the receiver repeatedly. Each time you press DISPLAY, the display will change cyclically as follows: BLUETOOTH device name - BLUETOOTH device address - Sound field currently applied - Volume level - Input you selected 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 273 6. Select [Enter]. The name you entered is registered. Canceling naming input Press RETURN. Note Some letters that can be displayed on the TV screen cannot be displayed on the display panel. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 274 Note You cannot select [2ch Analog Direct] while using the BD/DVD, GAME, VIDEO 2, BLUETOOTH, USB, Home Network, Music Services, or AirPlay function. [Multi Stereo] does not work when multi-channel audio signals are being received. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 275 HD-D.C.S.: HD Digital Cinema Sound (HD-D.C.S.) is Sony’s new innovative home theater technology using the latest acoustic and digital signal processing technologies. It is based on the precise response measurement data of a mastering studio.
Page 276 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Music mode You can take advantage of surround sound simply by selecting one of the receiver’s pre-programmed sound fields. These bring the exciting and powerful sound of concert halls into your home. Berlin Philharmonic Hall (BERLIN): Reproduces the sound characteristics of the Berlin Philharmonic Hall.
Page 277 2 channels except LFE signals. Headphone (Direct) (HP DIRECT) : This mode is selected automatically if you use headphones when [2ch Analog Direct] is selected. This mode outputs analog signals without processing by the equalizer, sound field, etc. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 278 AIFF: 32 kHz – 192 kHz, 16/24 bit PCM ALAC: 32 kHz - 96 kHz, 16/24 bit ALAC DSD (for STR-DN1050 only): 2.8 MHz, 1 bit DSD The receiver does not play files encoded with DRM. Note Compatibility with all encoding/writing software, recording devices and recording media cannot be guaranteed.
Page 279 1. Select [Settings] - [Network Settings] from the home menu. 2. Select [DLNA Control Permission]. 3. Select the device you want. 4. Select [Remove]. 5. Select [OK]. The selected device is deleted from the device list. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 280 1. Select [Settings] - [Network Settings] from the home menu. 2. Select [TV SideView Setup]. 3. Select the device you want to delete. 4. Select [Delete]. 5. Select [OK]. The selected device is deleted from the device list. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 281 When you play content on a device connected to the receiver via an HDMI connection, the receiver is also automatically turned on and switched to the appropriate HDMI input. Note Depending on the TV, the start of the content may not appear. Related Topic Passing HDMI signals through (Pass Through) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 282 When [Control for HDMI] is set to [On], the [Audio Out] settings in the HDMI Settings menu will be set automatically based on the System Audio Control settings. Hint You can also operate this function using the TV menu. For details, refer to the operating instructions of the TV. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 283 Turn on the power supply interlock function of the TV before using the System Power-Off function. For details, refer to the operating instructions of the TV. Some connected devices may not be turned off depending on their specifications. For details, refer to the operating instructions of the connected device. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 284 Switching the sound field for the scene selected on your TV (Scene: Sound field) Cinema: HD-D.C.S. Sports: Sports Music: Live Concert Animation: A.F.D. Auto Photo: A.F.D. Auto Game: A.F.D. Auto Graphics: A.F.D. Auto Note The sound field may not change depending on some TVs. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 285 [Sound Optimizer], [Dual Mono], or [A/V Sync]. Note Your TV must be able to access a broadband service to use the Home Theatre Control function. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 286 TV. Note The receiver is recognized as [Tuner] by the TV. Your TV must support the link menu. Some of the operations may not be available depending on the type of TV. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 287 [Control for HDMI] is set to [On]. The MHL device is connected via an MHL cable (not supplied) to the HDMI/MHL (VIDEO 2 IN) (for STR-DN1050 only), HDMI VIDEO 1 IN (MHL) (for STR-DN1050 only) or HDMI VIDEO IN (MHL) (for STR-DN850 only) jack.
Page 288 It may not be possible to take the correct measurements or to perform Auto Calibration at all if special speakers such as dipole speakers are used. Related Topic Confirming active subwoofer setup Selecting the front speakers Connecting the optimizer microphone 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 289 1. Connect the supplied optimizer microphone to the AUTO CAL MIC jack. 2. Set up the optimizer microphone. Place the optimizer microphone where you will sit and set it at the same height as your ears. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 290 To select [SP B] or [SP A+B], set the assignment for the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B terminals to [Front B] by using [SB Speaker Assign] in the Speaker Settings menu. Note This setting is not available when headphones are connected. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 291 The D.C.A.C. is designed to achieve proper sound balance for your room. However, you can adjust the speaker levels manually according to your preference using [Test Tone]. Related Topic Outputting a test tone from each speaker (Test Tone) 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 292 If you connect a subwoofer with an auto standby function, set it to off (deactivated). Note Depending on the characteristics of the subwoofer you are using, the setup distance value may be different from the actual position. 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 293 Hint The measurement results may vary depending on the position of the subwoofer. However, continuing to use the receiver with that value does not cause problems. Related Topic List of messages after Auto Calibration measurements 4-488-938-11(3) Copyright 2014 Sony Corporation...
Page 294 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Menu list (on the display panel) The following options are available in each menu. Auto Calibration settings [<AUTO CAL>] Auto Calibration start [A.CAL START] Auto Calibration type [CAL TYPE] (*1) FULL FLAT, ENGINEER, FRONT REF, OFF Automatic Phase Matching [A.P.M.] (*1)
Page 295 LARGE, SMALL Surround back speaker assign [SB ASSIGN] (*4) SPK B, ZONE2 (for STR-DN1050 only), BI-AMP, OFF Front left speaker distance [FL DIST.] (*2) FL 1.00 m to FL 10.00 m (FL 3’3” to FL 32’9”) (0.01 m (1 inch) interval) Front right speaker distance [FR DIST.] (*2)
Page 296 (Name).” in Input Settings menu. Digital audio input assignment [A. ASSIGN] OPT 1, OPT 2, COAX, NONE Component video input assignment [V. ASSIGN] (for STR-DN1050 only) COMP 1, COMP 2, NONE Surround settings [<SURROUND>] HD-D.C.S. effect type [HD-D.C.S. TYP] (*6) DYNAMIC, THEATER, STUDIO EQ settings [<EQ>]...
Page 297 Digital broadcast language selection [DUAL MONO] MAIN/SUB, MAIN, SUB Dynamic Range Compressor [D. RANGE] COMP. ON, COMP. AUTO, COMP. OFF HDMI settings [<HDMI>] 4K Scaling [4K SCALING] (for STR-DN1050 only) AUTO, OFF Control for HDMI [CTRL: HDMI] CTRL ON, CTRL OFF Pass Through [PASS THRU]...
Page 298 You can only select this parameter if you select [HD-D.C.S.] as the sound field. For USA, Canadian, Mexican, and Australian models only You can only select this parameter when a BLUETOOTH device is paired. x.xxx represents the version number. 4-488-938-11(3) Copyright 2014 Sony Corporation...

This manual is also suitable for:

Str-dn850

Sony STR-DN1050 Help Manual

Quick Links

Related Manuals for Sony STR-DN1050

Summary of Contents for Sony STR-DN1050

This manual is also suitable for: