Operating Without Connecting To A Tv - Sony STR-DN2010 Manual de instrucciones Operating Instructions Manual

Operating without
connecting to a TV
You can operate this receiver using the display
even if the TV is not connected to the receiver.
RETURN/
EXIT O
Using the menu in the display
Press GUI MODE repeatedly to
select "GUI OFF".
The receiver is switched to front panel display
mode.
1
Press AMP.
2
Press MENU.
3
Press V/v repeatedly to select
the menu you want, then press
or b.
4
Press V/v repeatedly to select
the parameter you want to
adjust, then press
GB
122
5
To return to the previous
display
Press B or RETURN/EXIT O.
AMP
To exit the menu
Press MENU.
Note
Some parameters and settings may appear dimmed
on the display. This means that they are either
unavailable or fixed and unchangeable.
GUI MODE
V/v/B/b,
MENU
or b.
Press V/v repeatedly to select
the setting you want, then
press .