Sony STR-DN2010 Manual de instrucciones Operating Instructions Manual page 147

Type of Format Other conditions
content
Photo JPEG JPEG_SM, JPEG_MED,
or JPEG_LRG defined in
DLNA guidelines 1.0
Maximum Resolution:
4096 × 4096
Non-progressive JPEG
BMP Conforms to JPEG.
Some files may not be
played back.
PNG Conforms to JPEG.
Some files may not be
played back.
Video MPEG-2 MPEG_PS_NTSC
(NTSC) defined in DLNA
guidelines 1.0
Maximum Resolution:
720 × 480
Maximum System Bitrate:
10.08 Mbps
Maximum Bitrate*
CBR: 9.80 Mbps/VBR:
9.80 Mbps
* Bitrate is mixed with
MPEG-2 MPEG_PS_PAL defined
(PAL) in DLNA guidelines 1.0
Maximum Resolution:
720 × 576
Maximum System Bitrate:
10.08 Mbps
Maximum Bitrate*
CBR: 9.80 Mbps/VBR:
9.80 Mbps
* Bitrate is mixed with
Windows Maximum Resolution:
Media 720 × 480
Video Maximum Bitrate:
(WMV) 2 Mbps
Windows Media Video
7/8/9 standard definition
for Main profile mixed
with Windows Media
Video 7/8/9 excludes all
profile of Windows Media
Audio professional.
Some files may not be
played back.
MPEG-1 Layer 1/2/3,
PCM, or AC3 audio
format.
MPEG-1 Layer 1/2/3,
PCM, or AC3 audio
format.
Notes
• Not compatible with DRM protected files.
• Depending on the files, there may be files that
sometimes cannot be played back, even if they
meet the requirements described above.
• Concerning the formats defined in the DLNA
guidelines, the server is required to offer the
content to which the format information defined in
the DLNA guidelines has been added properly.
General
Power requirements
Area Power requirements
USA 120 V AC, 60 Hz
Europe 230 V AC, 50/60 Hz
Power output (DIGITAL MEDIA PORT)
DC OUT: 5V, 0.7A MAX
Power consumption 250 W
Power consumption (during standby mode)
0.5 W (When "Control for
HDMI", "Network
Standby" and "S-AIR
Standby" are set to "OFF")
Dimensions (width/height/depth) (Approx.)
17 in × 6 1/4 in × 12 7/8 in
(430 mm × 157.5 mm ×
324.5 mm) including
projecting parts and
controls
Mass (Approx.) 19 lb 14 oz (9.0 kg)
Design and specifications are subject to
change without notice.
Halogenated flame retardants are not used in
the certain printed wiring boards.
GB
147