Safety Information And Instructions; Obligations And Liability - HYDAC International FluidAqua Mobil FAM 15-P Operating And Maintenance Instructions Manual

FluidAqua Mobil - FAM 10/15-P

Safety Information and Instructions

These operating instructions contain the key instructions for properly and safely
operating the FluidAqua Mobil.
The safety of the FAM largely depends on maintenance. Regular required
maintenance is described in this manual. We will support you if the unit needs repair
and will provide original spare parts.

Obligations and Liability

The basic prerequisite for the safe and proper handling and operation of the FAM is
knowledge of the safety instructions and warnings.
These operating instructions in general, and the safety precautions in particular, are
to be adhered by all those who work with the FluidAqua Mobil.
Adherence is to be maintained to pertinent accident prevention regulations
applicable at the site where the product is used.
The safety precautions listed herein are limited solely to using the FluidAqua Mobile.
The FluidAqua Mobil has been designed and constructed in accordance with the
current state-of-the-art and recognized safety regulations. Nevertheless, hazards
may be posed to the life and limb of the individual using the product or to third
parties, and risk of damage may be posed to the product or other equipment and
property.
The FluidAqua Mobil is to be used:
 Solely for its designated use
 only when in a safe, perfect condition
Any faults or malfunctions which might impair safety are to be properly repaired or
remedied immediately.
Our General Terms and Conditions (AGB) apply. They are made available to the
owner upon concluding purchase of the unit at the latest. Any and all warranty and
liability claims for personal injuries and damage to property shall be excluded in the
event they are attributable to one or more of the following causes:
 Improper use of the FluidAqua Mobil or use deviating from its designated use
 Improper commissioning, operation and maintenance of the FluidAqua Mobil
 Operating the FluidAqua Mobil when the safety systems are defective
 Modifications to the FluidAqua Mobil made by the user or purchaser
 Improper monitoring of unit components that are subject to wear and tear
 improperly performed repair work
HYDAC FILTER SYSTEMS GMBH
BEWA FAM10-15-P 3193324b en-us 2011-01-19.doc
Safety Information and Instructions
en(us) Page 9 / 80
2011-01-19