Performing Maintenance - HYDAC International FluidAqua Mobil FAM 15-P Operating And Maintenance Instructions Manual

FluidAqua Mobil - FAM 10/15-P

Performing maintenance

The safety of all persons coming into contact with the FAM and the availability of the
unit for use are extremely dependent on service and maintenance.
Routine service and maintenance work is described in the documentation included:
Regular visual inspection of all hoses and conduits for leakage.
Regular visual inspection of the electrical apparatus for possible damage to lines,
plugs, sensors or cables and/or devices in the control cabinet.
Regular visual inspections of filling level, vacuum pump
Before carrying out any maintenance work the FAM must be shut down
safely. This means:
HYDAC FILTER SYSTEMS GMBH
BEWA FAM10-15-P 3193324b en-us 2011-01-19.doc
1. Main switch in position "0",
2. Power cord disconnected.
3. Mains cable wound around cable drum apparatus present on the
FAM. (This last as a protection against switching back on again!)
en(us)
Performing maintenance
Page 56 / 80
2011-01-19