Table of Contents
Advertisement
FluidAqua Mobil - FAM 10/15-P
Possible applications
Bypass purification (dewatering, filtration and degassing).
The FAM is connected with suction and pressure lines to the tank and cleans the
medium to be found there in continuous operation.
Transfer by pumping (dewatering, filtration and degassing)
The FAM is connected to a contaminated oil tank by means of a suction line and
pumps the fluid into the clean oil tank.
However, better purification results are achieved with bypass purification. Therefore,
the FAM should be operated after pumping in the bypass flow.
To avoid overfilling the purified oil tank, permanently monitor the oil level.
HYDAC FILTER SYSTEMS GMBH
BEWA FAM10-15-P 3193324b en-us 2011-01-19.doc
en(us)
Hydraulic diagram
Contaminated
oil
Clean oil
Page 29 / 80
2011-01-19
Advertisement
Table of Contents
Troubleshooting
