Performance - HYDAC International FluidAqua Mobil FAM 15-P Operating And Maintenance Instructions Manual

FluidAqua Mobil - FAM 10/15-P

Performance

The FAM is able to dewater the fluids described in the "Suitable fluids" section to a
water content of less than 1000 PPM.
FAM - 10
FAM10/15
The dewatering speed is dependent on:
Water content
Fluid temperature
Detergent additives
Flow rate of the FAM
As an approximate guideline, the dimensioning of the FluidAqua Mobil can be
defined in accordance with the tank volume.
Tank volume in liters
< 2,000
2,000 – 7,000
Note that free water, e.g. on the bottom of the tank, can have an influence on the
entire water content in the system. Drain off free water before taking a sample.
For the determination of the water content, the sample should be extracted from the
system to be cleaned at a test connection during operation if at all possible.
HYDAC FILTER SYSTEMS GMBH
BEWA FAM10-15-P 3193324b en-us 2011-01-19.doc
Typical dewatering rates:
en(us)
~ 0.8 l/h
~ 1.0 l/h
Size
FAM - 10
FAM10/15
FAM Description
Dewatering rate
Page 20 / 80
2011-01-19