Technical Specifications - Nibe VPB Series Installer Manual

Technical specifications

VPB 200
Volume
Volume, charge coil
Net weight
Heat transfer (60/50 °C at 50 °C hot water temperature)
Heat content at 50°C
Equivalent amount of hot water (40°C)
Heating time (10 °C to 45 °C) 8 kW charge power
Heating time (10 °C to 80 °C) 8 kW charge power
Max operating temperature
Max pressure, primary side
Max pressure, water heater
Max recommended heat pump size*
Part No.
VPB 300
Volume
Volume, charge coil
Net weight
Heat transfer (60/50 °C at 50 °C hot water temperature)
Heat content at 50°C
Equivalent amount of hot water (40°C)
Heating time (10 °C to 45 °C) 8 kW charge power
Heating time (10 °C to 80 °C) 8 kW charge power
Max operating temperature
Max pressure, primary side
Max pressure, water heater
Max recommended heat pump size*
Part No.
* Applies at maximum brine temperature of 10 °C and maximum of 53 °C in the tank.
VPB/VPBS
Copper Enamel
litre 172 178
litre 2.0
kg 101 111
kW 13.0 10.1
kWh 8.0
litre 230 238
hours 0.9
hours 1.8
°C
bar/MPa 3/0.3
bar/MPa 10/1.0
kW 15
088 515 088 517
Copper Enamel
litre 272 274
litre 8.5
kg 130 143
kW 12.8 11.9
kWh 12.6 12.7
litre 362 364
hours 1.4
hours 2.8
°C
bar/MPa 3/0.3
bar/MPa 10/1.0
kW
083 009 083 011
Chapter 8 |
Stainless
176
4.8 7.8
80
10.1
8.3 8.2
235
0.9 0.9
1.8 1.8
85
12
088 518
Stainless
282
8.4 8.8
101
11.4
13.4
376
1.4 1.4
2.8 2.8
85
12
083 010
Technical data 19