3. From the front, slide the switch into the rack at the desired height.
4. Secure the switch unit to the rack posts with M6 screws (Item 3) and either clip nuts
(Item 4) or cage nuts (Item 5). Torque the screws to approximately 5.7 Nm ± 0.1 Nm
(50 inch-pounds).
5. Connect all external cables in accordance with the
page
6. Initialize the switch. See
7. If the switch is a replacement unit, set Vital Product Data (see
Product Data" on page
© Copyright Lenovo 2019
3
40.
74).
4
Chapter 5, "Initializing the
Chapter 3: Installing NE10032 Hardware and Options
"Cabling Guidelines" on
NE10032", on
page
77.
"Configuring Vital
43