Add-On Elements - Walther Systemtechnik SMS-22 Assembly Instructions Manual

Rev. 1.3

10.6.2 Add-on Elements

3
2
Pressure Sensor
The installation of the pressure sensor will be made factory-side. Its actual position can be either at the side
(left or right) or on top. Please refer to the assembly instructions „Pressure Sensors 97PA-21x-xxx" for addi-
tional information.
Pos. Description
1 Pressure sensor mounted on top of the spray valve
2 Pressure sensor mounted at the right side of the spray valve
Heating Plate
The heating plate (3) will be mounted factory-side. Its actual position will be at the side (left / right). Please
see the description „Heating and Accessories" for additional information.
Assembly Instructions - Spray Valve SMS-22
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Page 25 of 25
3
1