Installation - ADJ Par Z Move RGBW User Instructions

Par Z Move RGBW
NOTICE: When installing the unit, the trussing or area of installation must be able to hold 10 times
the weight without any deformation. The suitable enviromental temperature for this lighting fixture is
between -25˚ C to 45˚ C. Do not place this lighting fixture in an enviroment where the temperatures
are under or above the temperatures stated above. This will allow the fixture to run at its best and
help prolong the fixture life. Be sure this fixture is kept at least 12m (40ft) away from any flammable
materials (decoration etc.).
The Par Z Move RGBW is fully operational in three different mounting positions, hanging upside-
down, mounted sideways on trussing, or set on a flat level surface. Be sure this fixture is kept at
least 12m (40ft) away from any flammable materials (decoration etc.). Always use and install the sup-
plied safety cable as a safety measure to prevent accidental damage and/or injury in the event the
clamp fails (see next page). Never use the carrying handles for secondary attachment.
Overhead mounting requires extensive experience, including calculating working load limits, installation
material being used, and perodic safety inspection of all installation material and unit. If you lack
these qualifications, do not attempt the installation yourself.
These installaiton should be checked by a skilled person once a year.
Screw one clamp each via a M12 screw and nut into the Omega bracket. Insert the quick-lock fasteners
of the Omega holder's into the respective holes on the bottom of the Par Z Move RGBW. Tighten
the quick-lock fasteners fully clockwise. Always use and install the supplied safety cable as a safety
measure to prevent accidental damage and/or injury in the event the clamp fails. Pull the safety
cable through the openings located on the base plate and over the trussing system or a safe fixation
spot. Insert the end in the carabine and tighten the safety screw. Note: Never use the carrying handles
for secondary attachment.
ADJ Products, LLC - www.adj.com - Par Z Move RGBW User Manual Page 8
1. CLAMPS (NOT INCLUDED)
2. OMEGA BRACKETS
3. QUICK-LOCK FASTENERS
4. SAFETY CABLE
ATTACHMENT POINTS
4
4

Installation