Care Fusion 3100B Pocket Manual page 33

Fluctuating mP
aw
• The Auto-Limit feature is activated
• Check the high-pressure setting
• Check for spontaneous breathing
Low Source Gas is illuminated
• This condition indicates an input pressure of less than 30 psi from either the
blender or the cooling air; check the input gas lines
• Ensure that all hoses are plugged into a gas source
• Check the blender setup configuration
• Some wye or T fittings used to split the high-pressure line have an internal
restriction; remove the wye or T fitting to check it
• The input water trap filter needs to be replaced: Replace the filter
• Internal leak: Call CareFusion Technical and Clinical Support
30