Handheld Computer - Gps Receiver; Figure 3.6 Cable Connecting Z-Xtreme Receiver And Pacific Crest Radio - ashtech Z-Xtreme System Manual

Figure 3.6
Communication Cable Connecting Z-Xtreme Receiver and Pacific Crest Radio
It is recommended that the radio be connected to the receiver prior to powering up the
receiver. This will ensure a clean power-up of the radio since, with spread-spectrum
radios, the receiver supplies power to the radio through this connection.

Handheld Computer - GPS Receiver

Although the base system does not have a dedicated handheld computer, the rover
system handheld computer may need to be connected to the base to configure the
base GPS receiver. This is done by connecting the handheld computer to the GPS
26 Real-Time Kinematic Surveying