Fully Connected Pole-Mounted Rover Gps Receiver; Figure 3.29 Fully Connected Pole-Mounted Rover Gps Receiver - ashtech Z-Xtreme System Manual

Fully Connected Pole-Mounted Rover GPS Receiver

A fully connected pole-mounted rover will have only three cable connections as
shown in Figure 3.29.

Figure 3.29 Fully Connected Pole-mounted Rover GPS Receiver

1. Computer communication cable plugged into the port labeled "Serial Ports –
A". This cable connects the handheld computer to the Z-Xtreme receiver.
This is a mandatory connection that will remain throughout operation.
2. Radio antenna cable plugged into the port labeled "Radio". This cable
connects the radio internal to the Z-Xtreme receiver to the radio antenna.
This is a mandatory connection that will remain throughout operation.
3. GPS antenna cable plugged into the port labeled "GPS". This cable connects
the Z-Xtreme receiver to the GPS antenna. This is a mandatory connection
that will remain thoughout operation.
47