Figure 3.13 Z-Xtreme Base Receiver With All Cable Connections - ashtech Z-Xtreme System Manual

Figure 3.13 Z-Xtreme Base Receiver with all Cable Connections

These connections are:
1. Receiver power cable plugged into the port labeled "POWER". This cable
connects an external power source to the Z-Xtreme receiver. This is an
optional connection not required for operation if the Z-Xtreme is fitted with an
internal battery.
2. Computer communication cable plugged into the port labeled "SERIAL
PORTS – A". This cable connects the handheld computer to the Z-Xtreme
receiver. In most cases, the handheld will need to be connected to the base
receiver for configuration. Once configured, the handheld computer
connection can be removed during operation.
3. Radio communication / power cable plugged into the port labeled "SERIAL
PORTS – B". This cable connects the Z-Xtreme receiver to the radio. This is
a mandatory connection that will remain thoughout operation.
4. GPS antenna cable plugged into the port labeled "GPS". This cable connects
the Z-Xtreme receiver to the GPS antenna. This is a mandatory connection
that will remain thoughout operation.
32 Real-Time Kinematic Surveying