Rtk Survey Preparation; Base System Setup; Figure 4.1 Base Transport Case - ashtech Z-Xtreme System Manual

For rtk surveying

Hide thumbs Also See for Z-Xtreme:

Table of Contents

RTK Survey Preparation

The previous two chapters laid the ground work for understanding the purpose of

each component of the ZX SuperStation system and the relationship between compo-

nents. This understanding of the functionality and connectivity of the RTK system

components will prove invaluable during RTK survey preparation and execution. Let's

put this new found knowledge to good use.

In this chapter, we will go through the steps required to set up the base and rover sys-

tems to perform an RTK survey.

Prior to your discussion on setup of the base system, let's examine how the base sys-

tem is packaged.

All components of the Z-Xtreme RTK base system reside in a transport case, Figure

4.1, with the exception of two items. These items are the tripod and base radio power

source (if using a 35-watt UHF/VHF radio). Upon opening the base transport case,

you will find two bags housing the components, as shown in Figure 4.1.

Table of Contents

Show Quick Links

Table of Contents