Gps Receiver - Receiver Power System; Figure 3.21 Computer Communication Cable - ashtech Z-Xtreme System Manual

For rtk surveying

Hide thumbs Also See for Z-Xtreme:

Table of Contents

The handheld computer – GPS receiver connection particulars are identical for the

base and rover systems. Please refer to the discussion on handheld computer – GPS

receiver connection under the Base System above for more details.

GPS Receiver - Receiver Power System

Under most operational conditions, the rover system will be powered by the internal

battery to the Z-Xtreme receiver. An optional external power source is available for

use on the rover system if extended operation is required without interruption. The

external power source is connected to the GPS receiver via a dedicated external

power cable.

The external power source and cable is identical for the base and rover system. For

details on the connection, please refer to the GPS Receiver – Receiver Power Sys-

tem section under Base System above.

Now that we have reviewed the connectivity of each backpack rover system compo-

nent individually, let's examine each primary component fully connected, beginning

with the Z-Xtreme receiver.

Real-Time Kinematic Surveying

Table of Contents

Show Quick Links

Table of Contents