Siemens SIMOTICS S-1FK2 Series Configuration Manual page 24

Description of the motors
2.3 Technical features and ambient conditions
European RoHS Directive
The SIMOTICS motor series complies with the Directive 2011/65/EU regarding limiting the
use of certain hazardous substances.
European Directive on Waste Electrical and Electronic Equipment (WEEE)
The SIMOTICS motor series complies with the 2012/19/EU directive on taking back and
recycling waste electrical and electronic equipment.
Eurasian conformity
SIMOTICS motors comply with the requirements of the Russia/Belarus/Kazakhstan (EAC)
customs union.
China Compulsory Certification
SIMOTICS motors do not fall within the scope covered by the China Compulsory
Certification (CCC).
CCC negative certification:
CCC product certification
(https://support.industry.siemens.com/cs/products?search=CCC&dtp=Certificate&mfn=ps&o
=DefaultRankingDesc&pnid=13347&lc)
China RoHS
SIMOTICS motors comply with the China RoHS.
You can find additional information at:
China RoHS (https://support.industry.siemens.com/cs/ww/de/view/109738656/en)
Underwriters Laboratories
SIMOTICS motors are generally in compliance with UL and cUL as components of motor
applications, and are appropriately listed.
Specifically developed motors and functions are the exceptions in this case. Here, it is
important that you carefully observe the contents of the quotation and that there is a cUL
mark on the rating plate!
Quality systems
Siemens AG employs a quality management system that meets the requirements of ISO
9001 and ISO 14001.
Certificates for SIMOTICS motors can be downloaded from the Internet at the following link:
Certificates for SIMOTICS motors
(https://support.industry.siemens.com/cs/ww/de/ps/13347/cert)
22
1FK2 synchronous motors for SINAMICS S120
Configuration Manual, 06/2019, A5E46927724B AB