Siemens SIMOTICS S-1FK2 Series Configuration Manual page 16

Fundamental safety instructions for the SIMOTICS documentation
1.1 Fundamental safety instructions
Active implant malfunctions due to electromagnetic fields
Electromagnetic fields (EMF) are generated by the operation of electrical power equipment,
such as transformers, converters, or motors. People with pacemakers or implants are at
particular risk in the immediate vicinity of this equipment.
• If you have a heart pacemaker or implant, maintain the minimum distance specified in
Active implant malfunctions due to permanent-magnet fields
Even when switched off, electric motors with permanent magnets represent a potential risk
for persons with heart pacemakers or implants if they are close to converters/motors.
• If you have a heart pacemaker or implant, maintain the minimum distance specified in
• When transporting or storing permanent-magnet motors always use the original packing
• Clearly mark the storage locations with the appropriate warning labels.
• IATA regulations must be observed when transported by air.
Injury caused by moving or ejected parts
Contact with moving motor parts or drive output elements and the ejection of loose motor
parts (e.g. feather keys) out of the motor enclosure can result in severe injury or death.
• Remove any loose parts or secure them so that they cannot be flung out.
• Do not touch any moving parts.
• Safeguard all moving parts using the appropriate safety guards.
Fire due to inadequate cooling
Inadequate cooling can cause the motor to overheat, resulting in death or severe injury as a
result of smoke and fire. This can also result in increased failures and reduced service lives
of motors.
• Comply with the specified cooling requirements for the motor.
14
WARNING
chapter "Correct usage" from such motors.
WARNING
chapter "Correct usage".
materials with the warning labels attached.
WARNING
WARNING
1FK2 synchronous motors for SINAMICS S120
Configuration Manual, 06/2019, A5E46927724B AB