For connector size M40
①
②
③
④
⑤
⑥
⑦
Lock the round connector properly on the motor
Information on locking is provided in Chapter "Handling the quick-action locking (Page 108)".
1FK2 synchronous motors for SINAMICS S120
Configuration Manual, 06/2019, A5E46927724B AB
SPEED-CONNECT connector, size M40
Terminal for the cable shield
Cable shield
Connection diagram
U; V; W = power cables, 1.5 mm
BD1+ and BD2- = brake cable without lettering, 1.5 mm
PE = protective conductor
Cable shield
Conductor designations
Recommended length of the cable ends: 105 mm
, each cable with separate shielding
2
, shielded together
2
Electrical connection
8.3 System integration
107