Tektronix AVG1 User Manual page 36

Operating Procedures
2- 12
5. Press Quit/Save. A dialog box appears.
NOTE. If you modify any signal that was shipped on the factory disks, the
platform adds an underscore to the front of the name.
6. Touch Save As. A text entry window appears, as shown in the following
illustration. The platform suggests a new test signal name for you by adding
an underscore to the front of the current name.
7. If you want to use the displayed name, touch OK.
8. To use a different name, do the following:
a. From the Text Entry window, delete the suggested name using the
BS key, and then enter new text. (You cannot backspace over an
underscore character.)
b. Touch Set 1 or Set 2 to provide additional sets of characters.
c. Touch OK when text is complete.
9. Touch Quit/Save to exit the window.
AVG1 Analog Video Generator User Manual