Table of Contents
Advertisement
Operating Procedures
2- 6
2. Touch the desired signal set on the display. The Test Signals window for the
selected signal set appears. In the following example, NTSC is selected.
3. Each test signal icon in the Test Signals window represents one or more
signals. In this example, the 100% Color Bars signal is being generated.
4. To change to another Color Bar signal, touch the Color Bar repeatedly to
cycle through all available signals. You can also display the complete list of
test signals available under a selected test-signal icon by touching the list
box or by rotating the Navigation knob, and then select a signal by pressing
the front-panel Select button.
5. To change to a different signal type, such as Linearity, touch the correspond-
ing icon on the display. Then select the signal as shown in step 4.
6. To select the output signal using the List window, display the list of test
signals by pushing the front-panel List button. Use the Navigation arrow
keys to highlight the module and signal, and then push the Select button.
AVG1 Analog Video Generator User Manual
Advertisement
Table of Contents
