Tektronix AVG1 User Manual page 34

Operating Procedures
2- 10
3. Enter text as follows:
a. Touch the desired letters on the display.
b. Touch Return if you want to enter a new line.
c. Touch the list box at the top of the window to see all the text entered.
d. Touch OK when text entry is complete. The Signal Text Overlay menu
returns.
4. Touch Text On/Off to display the text on your monitor. The Signal Text
Overlay menu lists the text you previously entered, as shown in the
following illustration.
5. Touch H Pos and enter a value from the keypad, or rotate the knob until the
desired horizontal position is reached.
6. Touch V Pos and enter a value from the keypad, or rotate the knob until the
desired vertical position is reached.
7. If you want to reset the text, horizontal and vertical to previously saved
values, touch Reset.
8. Touch Quit/Save. A dialog box appears; you can enter a new name for the
test signal. If you touch Save, the original test signal is modified to include
the overlaid text and an underscore is added to the front of the name. If you
touch Save As, the platform displays a text entry window in which you can
rename the signal.
AVG1 Analog Video Generator User Manual