Table of Contents
Advertisement
AVG1 Analog Video Generator User Manual
CAUTION. The module will lose its signal memory 30 seconds after you remove it
from the TG 2000 Platform mainframe. Before removing the module, be sure you
have backed up the signals.
6. Remove the module. To leave the slot empty, proceed to step 8 of this
procedure.
7. To install a module in the empty slot, proceed to Module Installation on
page C- -2.
8. To ensure proper cooling and adherence to EMI shielding requirements,
install a blank panel to cover any empty slots in the rear panel. A spare blank
panel is included in the TG 2000 Platform mainframe accessories kit.
9. Tighten the screws on the blank rear panel.
10. Reinstall the top cover and insert and tighten all top cover screws.
Appendix C: Installation
C- 11
Advertisement
Table of Contents
