Table of Contents
Advertisement
AVG1 Analog Video Generator User Manual
Table A- 1: Electrical specifications (cont.)
Characteristics
Out-of-band Signal/Noise Ratio
Out-of-band Signal/Noise Ratio, typical
Crosstalk (channel to channel)
Glitches (synchronous noise)
Shallow ramp signal
Shallow ramp signal, typical
Standard signal, typical
Pedestal Gate, typical
Return Loss/Output Impedance
Output Timing Offset Adjustment Range
Trigger Output
Amplitude
Rise Time, typical
Output Impedance
Trigger Range
Power Consumption
Appendix A: Specifications
Description
SNR to 100 MHz, 54 dB RMS relative to
700 mV on quiet line
50 dB max spur, 6 MHz to 50 MHz
45 dB max spur, 50 MHz to 100 MHz
- - 60 dB to 6 MHz. From any one
channel to any other one channel.
2 mV peak
1 mV peak on full DAC range shallow
ramp (0.1 mV per bit)
2 mV peak
1 mV peak on pedestal levels
5 mV on pedestal levels
40 dB to 6 MHz, 75 Ω
Added to genlock offset timing, offsets
relative to internal clock and frame reset.
Adjustable to any point in the video
frame.
TTL compatible if unterminated.
10 ns
75 Ω
Adjustable to any point in the video frame
+5 Volts:
5.5 Watts typical
- - 5 Volts:
5 Watts typical
- - 2 Volts:
0.6 Watts typical
+15 Volts: 0.75 Watts typical
- - 15 Volts: 0.75 Watts typical
Battery:
30 A maximum
5 mV;
5 mV
A- 3
Advertisement
Table of Contents
