Getting Started
1- 4
c. Touch Output Config.
d. Select Composite All Channels.
10. Adjust your monitor to view the signal. Check that the signal appears as
expected. For example, if you selected a color bar signal output, check for a
color bar signal on the monitor display.
11. Move the output cable to each of the channel output connectors in turn to
ensure that the appropriate signal appears.
12. Move the cable back to Output 1.
13. Select a different test signal in the same signal set and check that the
displayed signal changes. You only need to do this on Output 1.
AVG1 Analog Video Generator User Manual