Machine Plate; Safety Instructions For Particular Operating Phases - Norton Clipper TR 232 S Operating Instructions Manual

VERS. 2016.04.29
1.2

Machine plate

Important data can be found on the following plate located on the machine:
Machine Code
Machine Model
Machine type

1.3 Safety instructions for particular operating phases

Before commencing work

Before commencing work, make yourself familiar with the working environment at the place of
use. The working environment includes: obstacles in the area of work and manoeuvre, the
firmness of the floor, necessary protection at the site relating to public thoroughfares and the
availability of help in the event of accidents.

Site the machine on an even, firm and stable base!

Check for correct mounting of the blade regularly.

Immediately remove damaged or badly worn blades, as they endanger the operator whilst
rotating.

The material to be cut must be held securely in place on the table to allow no unexpected
movement during cutting operation.

Always cut with the blade guard in position.

Only fit NORTON diamond blades with continuous rim to the machine! The use of other tools
can damage the machine!

Read the blades' specifications carefully to choose the correct tool for your application.

Attention is drawn to the use of BS2092 safety goggles in conformity with specified Processes
No.8 of the Protection of Eyes Regulation 1974, Regulation 2(2) Part 1. Also use the other
safety equipment as mentioned in the symbols plus a dust mask when dry cutting is applied.
Weight
Power
Serial number
Year of production
Safety standard Blade speed
TR 232_MAN_EN
Maximum blade diameter
Bore
diameter
7