Inverter Data [42] - WEG CFW-11 Programming Manual

Inverter Model and Accessories Identification

6.1 INVERTER DATA [42]

In this group are the parameters related to the inverter information and characteristics, such as inverter model,
accessories identified by the control circuit, software version, switching frequency, etc.
P0023 – Software Version
Adjustable
Range:
Properties:
Access groups
via HMI:
Description:
It indicates the software version contained in the FLASH memory of the microcontroller located on the control board.
P0027 – Accessories Configuration 1
P0028 – Accessories Configuration 2
Adjustable
Range:
Properties:
Access groups
via HMI:
Description:
Those parameters identify by means of a hexadecimal code the accessories that were found installed on the control
module.
For the accessories installed in the slots 1 and 2 the identification code is informed at the parameter P0027. In case
of modules connected in the slots 3, 4 or 5, the code will be shown through the parameter P0028.
6
The next table shows the codes shown in those parameters, regarding the main CFW-11 accessories.
6-2
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
0.00 to 655.35
RO
01 PARAMETER GROUPS
42 Inverter Data
0000h to FFFFh
RO
01 PARAMETER GROUPS
42 Inverter Data
Factory
Setting:
Factory
Setting: