Specifications - JUKI DDL-7000A-7 Series Instruction Manual

I. SPECIFICATIONS
No.
Item
1 Max. sewing speed
Factory-set sewing speed at the
2
time of shipment
3 Stitch length
4 Needle bar stroke
5 Thread take-up lever stroke
*1
6 Needle
7 Thread counts that are supported
8 Amount of lift of the presser foot
9 Lubrication
10 Lubrication method
11 Lubricating oil
12 Drive system
13 Electrical box
14 Power switch
15 Motor used
16 External dimensions
Operating temperature /
17
humidity range
18 Supply voltage/
19 Frequency
20 Power consumption
21 Mass of machine head
LED light
22
(Provided as standard)
23 Noise
(Caution) Sewing speed differs according to the sewing conditions.
* Stitch length can be maximized to 7 mm by changing over the feed dial and the throat plate with the optional
feed dial (22971402) and the optional throat plate (23645807).
DDL-7000AS-7
Model name
Light- to medium-weight materials
Stitch length less than 4mm
Stitch length 4mm or more
30.7±0.5mm
Link thread take-up lever 107mm
(106 to 112mm)
DB×1（#14）#14 to 18
134(Nm90) Nm90 to Nm110
#60 to #8 (200 to 600dtex)
JUKI CORPORATION OIL 7 (equivalent to ISO VG7)
Arm size: 432 mm x 105 mm; bed size: 476 mm x 178 mm
Temperature：5˚C to 35˚C/ Humidity：35% to 85%
Equivalent continuous emission
sound pressure level (L
workstation:
A-weighted value of 81.0 dBA ; (In-
cludes K
pA
to ISO 10821- C.6.2 -ISO 11204
GR2 at 4,000 sti/min.
5,000sti/min
4,000sti/min
4,000sti/min
5mm
Manual: 5.5 mm, By knee-lifter: 13 mm
Replenishment of oil reservoir (capacity: 450 ml)
Forced lubrication method
or
NEW DEFRIX OIL No. 1 (equivalent to ISO VG7)
Main-shaft direct-drive system
Integral with the machine head
3-phase / CE
AC servomotor, 550 W
Distance from machine arm to needle: 260 mm;
height of the machine arm: 130 mm
Entire length: 603 mm
Single phase 220V, Rating ± 10 %
50/60Hz
210VA
Completed machine head 34 kg
Illumination is adjustable in five steps.
) at the
pA
= 2.5 dBA) ; according
– 1 –
DDL-7000AH-7
Heavy-weight materials
Stitch length less than 5mm
4,000sti/min
Stitch length 5mm or more
3,500sti/min
3,500sti/min
5mm( ※ )
35±0.5mm
Link thread take-up lever 112mm
(108 to 115mm)
DP×5（#21）#20 to 23
134(Nm130) Nm125 to Nm160
#30 to #8 (600 to 1200dtex)
Equivalent continuous emission
sound pressure level (L ) at the
pA
workstation:
A-weighted value of 83.0 dBA ; (In-
cludes K = 2.5 dBA) ; according
pA
to ISO 10821- C.6.2 -ISO 11204
GR2 at 4,000 sti/min.