JUKI DDL-7000A-7 Series Instruction Manual page 24

(2) Overlapped stitching pattern
Overlapped stitching pattern can be programmed.
A C
C
B
B
D
[Setting procedure of the overlapped stitching]
M

A : Number of stitches of normal stitching setting : 0 to 15 stitches
B : Number of stitches of reverse stitching setting : 0 to 15 stitches
C : Number of stitches of normal stitching setting : 0 to 15 stitches
D : Number of times of repetition : 0 to 15 times
1. When process D is set to 5 times, the sewing is repeated as A
→ B → C → B → C.
2. The number which exceeds 9 is indicated as follows:
A = 10, b = 11, c = 12, d = 13, E = 14, and F = 15.
1) Press
❻ - 
2) Change the number of stitches and the number of
– 22 –
 to enable the overlapped stitching
pattern.
When the overlapped stitching pattern is enabled,
is displayed in the display section C.
times for the target process (A, B, C, D) with
❻ to  .