JUKI DDL-7000A-7 Series Instruction Manual page 33

No. Item
P138 Function of pedal curve
selection
P139 Function of reverse feed
stitching on the way
P140 Number of stitches of
reverse feed stitching on the
way
P141 Condition to be satisfied
to enable the reverse feed
stitching on the way while
the sewing machine is at
rest
P142 Thread trimming function
after performing reverse
feed stitching on the way
P143 Sewing speed for reverse
feed stitching on the way
P163 Ending angle of soft start for
the thread clamp
P166 1st electric current time for
thread clamp
P167 2nd electric current value for
thread clamp (ON duty)
J10 Setting of brightness of the
backlight
J14 Password
Main software version
N01
Panel software version
N02
＊ Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at
the time of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated. If
it is necessary to change the set value, please purchase the Engineer's Manual and follow the instructions.
Description
Pedal curve is selected. (Improving pedal inching operation)
2
Sewing speed
0
The function activated when the reverse feed stitching on the
way switch is pressed is selected with this function setting item.
0: Normal back-tack function
1: Function of reverse feed stitching on the way is enabled
(In the case the function for reverse feed stitching at midpoint
of sewing is enabled, P142 function can be used.)
The number of stitches of reverse feed stitching on the way is
set with this function setting item.
The condition to be satisfied to enable the reverse feed stitch-
ing switch while the sewing machine is at rest is set with this
function setting item.
0: Disabled while the sewing machine is at rest
1: Enabled while the sewing machine is at rest
Automatic thread trimming operation after performing the
reverse feed stitching on the way is set with this function setting
item.
0: Automatic thread trimming is not performed after the com-
pletion of reverse feed stitching on the way
1: Automatic thread trimming is performed after the comple-
tion of reverse feed stitching on the way
Sewing speed during the reverse feed stitching on the way is
set with this function setting item.
The ending angle of the soft start for the thread clamp is set
with this function setting item.
* Refer to the explanation of operation of the thread clamp
solenoid in the Engineer's Manual for details.
Period of time during which the 1st electric current is fed ap-
plied to the thread clamp is set with this function setting item.
* Refer to the explanation of operation of the thread clamp
solenoid in the Engineer's Manual for details.
"ON duty" is set in order to determine the 2nd electric current
value of the thread clamp * Refer to the explanation of opera-
tion of the thread clamp solenoid in the Engineer's Manual for
details.
Brightness of the backlight is set with this function setting item.
If the password is set to a number other than "0000", the
password entry screen will be displayed before displaying the
function setting screen by pressing the M switch.
* This data is not initialized with the parameter P70.
Main software version is displayed with this function setting
item.
Panel software version is displayed with this function setting
item.
– 31 –
Level
U
1
Pedal stroke
U
U
U
U
U
U
U
U
U
S
U
U
Default
Setting
range
AS-7 AH-7
0-2
0 0
0-1
0 0
1-19
4 4
0-1
0 0
0-1
0 0
200-3000
1900 1900
(sti/min)
0-720
340 340
1-990
7 7
0-100
69 69
1-3 3 3
0000-9999 0000 0000