JUKI DDL-7000A-7 Series Instruction Manual page 22

Key Screen
No. display
❾
Z

Z

Z

Z

Z

I

J

K

L

M

N - Q

Y

X

R

S

T

U,V,W
How long
the key
must be
pressed
Short time This key is used to subtract one stitch from the number of reverse feed
stitches at the beginning and end of sewing (process B).
Long time Continuous input is possible
Short time This key is used to add one stitch to the number of reverse feed stitches at
the beginning and end of sewing (process C).
Long time Continuous input is possible
Short time This key is used to subtract one stitch from the number of reverse feed
stitches at the beginning and end of sewing (process C).
Long time Continuous input is possible
Short time This key is used to add one stitch to the number of reverse feed stitches at
the beginning and end of sewing (process D).
Long time Continuous input is possible
Short time This key is used to subtract one stitch from the number of reverse feed
stitches at the beginning and end of sewing (process D).
Long time Continuous input is possible
Short time Used to changing over the automatic reverse feed stitching at the beginning
of sewing to: Reverse feed stitching / Double reverse feed stitching / Disable
Short time Used to change over the automatic reverse feed stitching at the end of sew-
ing to: Reverse feed stitching / Double reverse feed stitching / Disable
Short time Used to set the type of stitching to free stitching
Short time This key is used to set the sewing mode to the constant-dimension sewing
(straight line).
Short time Used to set the type of stitching to overlapped stitching
Short time Used to change over the constant-dimension stitching pattern
Short time Used to change over the one-shot operation between enable / disable
Long time Initialization screen for the memory switches can be displayed by pressing
this key.
Short time Used to change over the soft-start function between enable and disable
Short time This key is used to change over the thread presser function between enable
/ disable.
Short time This key is used to change over the stop position of the needle bar when the
sewing machine stops between upper and lower positions.
Short time This key is used to change over the thread trimming function between en-
able / disable.
Short time This key is used to change over the presser foot lifting status among four dif-
ferent states: Presser foot automatically goes up after the presser bar goes
up / Presser foot automatically goes up after thread trimming / Presser foot
automatically goes up both after the presser foot goes up and the thread
trimming is performed / Presser foot does not automatically go up.
– 20 –
Function