JUKI DDL-7000A-7 Series Instruction Manual page 29

Screen returns to the previous screen.
[Parameter number]
[Parameter data]
The screen is shifted to the sewing information display
screen
A
❽ - 
B
❻ - 
Example) To change the setting No. P-01 "the maxi-
mum number of revolutions":
❷ to change over to the setting num-
Press
ber display.
Press
ber P-01.
Press switch
❷ is pressed before confirming the data,
If
the operation being carried out will be cancelled
and the screen will return to the previous screen.
The current set value (maximum number of revo-
lutions) of function setting number P-01 is dis-
played. Change the maximum number of revolu-
tions with
value.
Then, confirm the setting with switch
❷ is pressed before confirming the data,
If
the operation being carried out will be cancelled
and the screen will return to the [Parameter num-
ber] screen.
– 27 –
❽ to  to select setting num-
❸ to confirm the number (A) .
❻ to  and confirm the set
❸ (B) .