JUKI DDL-7000A-7 Series Instruction Manual page 26

* Others
N O
[E/F process]
A
N
[G/H process]
C
N
The screen is shifted to the sewing information display
screen
P Q
B
❻ - 
D
❻ - 
– 24 –
1) Enable / disable of the sewing pattern can be
changed over by pressing
 is pressed, the selected pattern is en-
abled and the valid patterns are displayed on
display portion N to Q.
Immediately after one of the stitching patterns is
enabled, the numbers of reverse feed stitching
processes (A, B, C and D) are displayed on the
display section Z.
❸ is pressed, the display
2) When switch
section A and B changes its display to the num-
ber of stitches for the constant-dimension stitching
process (EF) is displayed.
The number of stitches for the process (EF) can
be set by pressing
3) Then, the content shown on display section Ⓐ
is changed over to the number of stitches for the
constant-dimension stitching process (GH) by
pressing switch
The number of stitches (0 to 99) for the process
(GH) can be set by pressing
❸ is pressed, the content
4) When switch
shown on display section Z is changed over to the
numbers of stitches for the reverse feed stitching
processes (A, B, C and D).
 . Every time
❻～ .
❸ .
❻～ .