Assembling - Makita DJR187 Technical Information

5-4-2

Assembling

Fig. 5-4-2-1
[1] Insert the longer part of Shoulder pin 6-8 into Gear
housing L assembly.
Note: For DJR186
Longer part
Gear housing L
[3] If LED circuit is removed, be sure to assemble it again.
5-5 Slider section
5-5-1 Disassembling
[1] Remove Insulation cover. (Refer to 5-1 Insulation cover.)
[2] Remove Slider assembly. (Refer to 5-2 Slider assembly.)
[3] Remove Rotor ass'y (Armature ass'y). (Refer to 5-3 Rotor ass'y (Armature ass'y).)
[4] Remove Gear complete. (Refer to 5-4 Gear complete.)
[5] Remove Slider guide complete from Slider.
Slider
Slider guide
complete
5-5-2 Assembling
Assemble Slider guide complete to Slider as shown below.
Slider
Shoulder pin 6-8
assembly
Slider guide
complete
[2] Assemble Felt 16x16 between Slider guide complete
and Gear housing L assembly, and push it in the
direction of the arrow.
Gear housing L
assembly
Slider guide
complete
Fig. 5-5-1-1
Fig. 5-5-2-1
19 / 24
Fig. 5-4-2-2
Felt 16x16