EC Declaration of Conformity The tool is intended for sawing wood, plastic and fer- For European countries only rous materials. Makita declares that the following Machine(s): Noise Designation of Machine: Cordless Recipro Saw Model No./ Type: DJR187 Conforms to the following European Directives:...
Prevent unintentional starting. Ensure the General power tool safety warnings switch is in the off-position before connecting to power source and/or battery pack, picking WARNING: up or carrying the tool. Carrying power tools with Read all safety warnings and your finger on the switch or energising power tools all instructions.
SAVE THESE INSTRUCTIONS. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal WARNING: DO NOT let comfort or familiarity objects, that can make a connection from one with product (gained from repeated use) replace terminal to another.
Insert it all the way until it locks in place causing fires, personal injury and damage. It will with a little click. If you can see the red indicator on the also void the Makita warranty for the Makita tool and upper side of the button, it is not locked completely. charger.
Indicating the remaining battery Switch action capacity CAUTION: Before installing the battery car- Only for battery cartridges with "B" at the end of the tridge into the tool, always check to see that the model number switch trigger actuates properly and returns to the "OFF"...
Lighting up the front lamp Hook CAUTION: When hanging the tool, set the lock/speed change lever in position to lock the switch trigger. (See the section titled “Switch action” .) CAUTION: Never hang the tool at high or potentially unstable location. Fig.6 ► 1 .
CAUTION: Keep hands and fingers away from the lever during the switching operation. Failure to do so may cause personal injuries. NOTE: If you remove the recipro saw blade without rotating the blade clamp lever fully, the lever may not be locked in the released position .
Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual.