Makita DJR360ZK Instruction Manual

Makita DJR360ZK Instruction Manual

Cordless recipro saw
Hide thumbs Also See for DJR360ZK:


Quick Links

Cordless Recipro Saw
Read before use.


Table of Contents

Summary of Contents for Makita DJR360ZK

  • Page 1 INSTRUCTION MANUAL Cordless Recipro Saw DJR360 Read before use.
  • Page 2: Specifications

    EC Declaration of Conformity The tool is intended for sawing wood, plastic and fer- For European countries only rous materials. Makita declares that the following Machine(s): Noise Designation of Machine: Cordless Recipro Saw Model No./ Type: DJR360 Conforms to the following European Directives:...
  • Page 3: General Power Tool Safety Warnings

    Remove any adjusting key or wrench before General power tool safety warnings turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may WARNING: result in personal injury. Read all safety warnings and all instructions.
  • Page 4 SAVE THESE INSTRUCTIONS. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If con- tact accidentally occurs, flush with water. If WARNING: DO NOT let comfort or familiarity liquid contacts eyes, additionally seek medical with product (gained from repeated use) replace help. Liquid ejected from the battery may cause strict adherence to safety rules for the subject irritation or burns.
  • Page 5: Functional Description

    Insert it all the way until it locks in place causing fires, personal injury and damage. It will with a little click. If you can see the red indicator on the also void the Makita warranty for the Makita tool and upper side of the button, it is not locked completely. charger.
  • Page 6 Indicating the remaining battery Switch action capacity CAUTION: Before installing the battery car- Only for battery cartridges with "B" at the end of the tridge into the tool, always check to see that the model number switch trigger actuates properly and returns to the "OFF"...
  • Page 7: Adjusting The Shoe

    Lighting up the front lamp Hook CAUTION: When hanging the tool, set the lock/speed change lever in position to lock the switch trigger. (See the section titled “Switch action” .) CAUTION: Never hang the tool at high or potentially unstable location. Fig.6 ► 1 .
  • Page 8: Operation

    CAUTION: Keep hands and fingers away from the lever during the switching operation. Failure to do so may cause personal injuries. NOTE: If you remove the recipro saw blade without rotating the blade clamp lever fully, the lever may not be locked in the released position .
  • Page 9: Maintenance

    Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual.
  • Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885450A224 20151216...

This manual is also suitable for:


Table of Contents