Gear Complete - Makita DJR187 Technical Information

5-4

Gear complete

5-4-1 Disassembling
5-4-1-1 For DJR187, DJR360
[1] Remove Insulation cover. (Refer to 5-1 Insulation cover.)
[2] Remove Rotor ass'y (Armature ass'y). (Refer to 5-3 Rotor ass'y (Armature ass'y).)
[3] Loosen twoM4x35 Hex socket head bolts, and remove Shoe guide plate.
[4] Loosen fiveM4x16 Pan head screws, and remove Gear housing R complete.
Note:
Roller may be attached on Gear housing R complete.
·
If LED circuit is removed, be sure to assemble it again.
·
Fig. 5-4-1-1-3
[5] LoosenM4x8 Hex socket head bolt, and remove Flat
washer 4.
Flat washer 4
Fig. 5-4-1-1-1
M4x35 Hex socket
head bolt (2 pcs.)
Shoe guide plate
Fig. 5-4-1-1-2
M4x16 Pan head
screw (5 pcs.)
Gear housing R
complete
M4x8 Hex
socket head bolt
17 / 24
Fig. 5-4-1-1-4
[6] Remove the assembled part of Gear complete and
Slider.
Roller
Gear complete Slider