Renaming A File - Agilent Technologies ESA Series Getting Started Manual

Renaming a File

1. To access the
Rename
2. Select the type of file you want to rename (setup, state, trace, limits, screens, or corrections). In this
example you are renaming a trace file; press
3. Select the drive and directory where your file is located. In this example, choose drive C:\START.
4. Select the file you want to rename. In this example, choose the file TEST1.TRC.
5. Press Name to open the Alpha Editor menu. For this example, rename the file to RENAME using the
Alpha Editor softkeys. (The Name: field is limited to eight characters.) Your display should look
similar to Figure 4-8.
6. Press Enter , Rename Now
your analyzer. The status line displays the message: C:\START\TEST1.TRC file renamed to
C:\START\RENAME.TRC.
Figure 4-8. Renaming a File
Chapter 4
menu, press ,
File Rename
Type
: your file is now renamed and visible within the directory displayed on
Viewing Catalogs and Saving Files
.
, Trace .
Saving a File
61