Setup; Inventory - Woodstock M1109 Owner's Manual

Inventory

The following is an inventory of the accessories shipped
with your Model M1109 Lathe/Mill.
®
SHOP FOX
Installed Accessories (Figure 7)
A. 6" Three-Jaw Chuck .......................................1
B. 4-Way Tool Post and Compound Rest ..................1
C. Follow Rest .................................................1
D. Compound Rest ............................................1
Packaged Accessories (Figure 8)
E. 8" Four-Jaw Universal Chuck ............................1
F. 8" Faceplate ................................................1
G. Four-Jaw Chuck Key ......................................1
H. Drill Chuck (1-13mm, JT-33) ............................1
I.
Wrench Set (8/10, 10/12, 14/17, 17/19 mm) ....1 EA
J. Hex Wrench Set (2, 4, 6, 8 mm) ....................1 EA
K. Three-Jaw Chuck Key .....................................1
L. Oil Can ......................................................1
M. Dead Center MT#5 .........................................1
N. #2 Standard Screwdriver .................................1
O. Wedge .......................................................1
P. Tool Post T-Handle Wrench ..............................1
Q. Dead Center MT#3 .........................................1
R. Three-Jaw Chuck Internal Jaws .........................3
S.
Taper Adapter MT#3 to MT#5 ...........................1
T. Arbor JT-33 to MT#3 ......................................1
U. Spot Paint ...................................................1
V. Drill Chuck Key .............................................1
W. Change Gear Set ...........................................1
— Keyed Drive Gear (24-fine Tooth), (Installed) .....1
— Keyed Drive Gear Set (28 & 35-Coarse Tooth) .....1
— Change Gear (24-tooth, One Installed) .............2
— Change Gear (25-tooth, One Installed) .............2
— Change Gear (27-tooth) ...............................1
— Change Gear (28-tooth) ...............................1
— Change Gear (30-tooth) ...............................1
— Change Gear (32-tooth) ...............................2
— Change Gear (34-tooth) ...............................1
— Change Gear (35-tooth) ...............................1
— Change Gear (36-tooth) ...............................1
— Change Gear (40-tooth) ...............................1
— Change Gear (42-tooth) ...............................1
— Change Gear (44-tooth) ...............................1
— Change Gear (46-tooth) ...............................1
— Change Gear (48-tooth, Installed) ...................1
— Change Gear (50-tooth, Installed) ...................1
— Change Gear (52-tooth) ...............................1
— Change Gear (60-tooth, Installed) ...................1

SETUP

A
Qty.
U
J
If any parts are missing, find the part
number in the back of this manual
and contact Woodstock International,
Inc. at (360) 734-3482 or at tech-
support@shopfox.biz.
-10-
M1109 Combo Lathe/Mill
C
B
Figure 7. Installed accessories.
L
E
R
G
P
K
O
I
S
M
W
Figure 8. Packaged accessories.
NOTICE
D
F
H
V
T
Q
N