Counter Trigger Source - Photon Focus MV0 CMOSIS Series User Manual

5 Counter & Timer
MissedFrameBurstStartTrigger Count the number of missed frame burst start triggers. A
missed frame burst start trigger event is generated, when a frame burst start trigger
cannot be processed.
MissedExposureStartTrigger Count the number of missed exposure start triggers. A missed
exposure start trigger event is generated, when an exposure start trigger cannot be
processed.
Missed Trigger Counts the number of any generated missed triggers. The missed trigger is the
logical OR connection of MissedAcqStartTrigger, MissedFrameStartTrigger,
MissedFrameBurstStartTrigger and MissedExposureStartTrigger.
Time Stamp Tick Counts the number of time stamp ticks. A time stamp tick generator is
available for every counter. It generates events with a rate, which can be configured. For
instances if the rate is set to 1 us and the counter event source is set to count time stamp
ticks, the counter increments every 1 us.
Line input source has additionally an activation configuration, which needs to be set
accordingly. Following configuration values are available:
Rising Edge Counter counts rising edges on the selected line input.
Falling Edge Counter counts falling edges on the selected line input
Both Edges Counter counts both edges on the selected line input
Activation configuration has only effect when line input is selected as a counter
event source, otherwise this configuration is ignored.
The counter can be temporarely switched off, if the counter event source is set
to off. It continue counting events as soon as counter event source has been
selected again.

5.1.6 Counter Trigger Source

The counter trigger source selects the signal which will be used to start the counter. The
following signals sources are available:
Off Disables the counter trigger.
Acquisition Trigger Starts with the reception of the acquisition trigger event.
Acquisition Start Starts with the reception of the acquisition start event.
Acquisition End Starts with the reception of the acquisition end event.
FrameTrigger Starts with the reception of the frame trigger event.
Frame Start Starts with the reception of the frame start event.
Frame End Starts with the reception of the frame end event.
Frame Burst Start Starts with the reception of the frame burst start event.
Frame Burst End Starts with the reception of the frame burst end event.
42 of 111
MAN078 12/2018 V1.1